Build an M3 Anvil! Cluster

From Alteeve Wiki
Jump to navigation Jump to search

 Alteeve Wiki :: How To :: Build an M3 Anvil! Cluster

First off, what is an Anvil!?

In short, it's a system designed to keep servers running through an array of failures, without need for an internet connection.

Think about ship-board computer systems, remote research facilities, factories without dedicated IT staff, un-staffed branch offices and so forth. Where most hosted solutions expect for technical staff to be available in short order, and Anvil! is designed to continue functioning properly for weeks or months with faulty components.

In these cases, the Anvil! system will predict component failure and mitigate automatically. It will adapt to changing threat conditions, like cooling or power loss, including automatic recovery from full power loss. It is designed around the understanding that a fault condition may not be repaired for weeks or months, and can do automated risk analysis and mitigation.

That's an Anvil! cluster!

An Anvil! cluster is designed so that any component in the cluster can fail, be removed and a replacement installed without needing a maintenance window. This includes power, network, compute and management systems.

Components

The minimum configuration needed to host servers on an Anvil! is this;

Simplest Anvil! system
Management Layer
Striker Dashboard 1 Striker Dashboard 2
Anvil! Node
Node 1
Subnode 1 Subnode 2
Foundation Pack 1
Ethernet Switch 1 Ethernet Switch 2
Switched PDU 1 Switched PDU 2
UPS 1 UPS 2

With this configuration, you can host as many servers as you would like, limited only by the resources of Node 1 (itself made of a pair of physical nodes with your choice of processing, RAM and storage resources).

Scaling

To add capacity for hosted servers, individual nodes can be upgraded (online!), and/or additional nodes can be added. There is no hard limit on how many nodes can be in a given cluster.

Each 'Foundation Pack' can handle as many nodes as you'd like, though for reasons we'll explain in more detail later, it is recommended to run two to four nodes per foundation pack.

Management Layer; Striker Dashboards

The management layer, the Striker dashboards, have no hard limit on how many Node Blocks they can manage. All node-blocks record their data to the Strikers (to offload processing and storage loads). There is a practical limit to how many node blocks can use the Strikers, but this can be accounted for in the hardware selected for the dashboards.

Nodes

An Anvil! cluster uses one or more nodes, with each node being a pair of matched physical subnodes configured as a single logical unit. The power of a given node block is set by you and based on the loads you expect to place on it.

There is no hard limit on how many node blocks exist in an Anvil! cluster. Your servers will be deployed across the node blocks and, when you want to add more servers than you currently have resource for, you simple add another node block.

Foundation Packs

A foundation pack is the power and ethernet layer that feeds into one or more node blocks. At it's most basic, it consists of three pairs of equipment;

  • Two stacked (or VLT-domain'ed) ethernet switches.
  • Two switched PDUs (network-switched power bars
  • Two UPSes.

Each UPS feeds one PDU, forming two separate "power rails". Ethernet switches and all sub-nodes are equipped with redundant PSUs, with one PSU fed by either power rail.

In this way, any component in the foundation pack can fault, and all equipment will continue to have power and ethernet resources available. How many Anvil! node-pairs can be run on a given foundation pack is limited only by the sizing of the selected foundation pack equipment.

Configuration

Template note icon.svg
Note: This is SUPER basic and minimal at this stage.

Striker Dashboards

Striker dashboards are often described as "cheap and cheerful", generally being a fairly small and inexpensive device, like a Dell Optiplex 3090, Intel NUC, or similar.

You can choose any vendor you wish, but when selecting hardware, be mindful that all Scancore data is stored in PostgreSQL databases running on each dashboard. As such, we recommend an Intel Core i5 or AMD Ryzen 5 class CPU, 8 GiB or more of RAM, a ~250 GiB SSD (mixed use, decent IOPS) storage and two ethernet ports.

Striker Dashboards host the Striker web interface, and act as a bridge between your IFN network and the Anvil! cluster's BCN management network. As such, they must have a minimum of two ethernet ports.

Node Pairs

An Anvil! Node Pair is made up of two identical physical machines. These two machines act as a single logical unit, providing fault tolerance and automated live migrations of hosted servers to mitigate against predicted hardware faults.

Each sub-node (a single hardware node) must have;

  • Redundant PSUs
  • Six ethernet ports (eight recommended). If six, use 3x dual-port. If eight, 2x quad port will do.
  • Redundant storage (RAID level 1 (mirroring) or level 5 or 6 (striping with parity). Sufficient capacity and IOPS to host the servers that will run on each pair.
  • IPMI (out-of-band) management ports. Strongly recommend on a dedicated network interface.
  • Sufficient CPU core count and core speed for expected hosted servers.
  • Sufficient RAM for the expected servers (note that the Anvil! reserves 8 GiB).

Disaster Recovery (DR) Host

Optionally, a "third node" of a sort can be added to a node-pair. This is called a DR Host, and should (but doesn't have to be) identical to the node pair hardware it is extending.

A DR (disaster recovery) Host acts as a remotely hosted "third node" that can be manually pressed into service in a situation where both nodes in a node pair are destroyed. A common example would be a DR Host being in another building on a campus installation, or on the far side of the building / vessel.

A DR host can in theory be in another city, but storage replication speeds and latency need to be considered. Storage replication between node pairs is synchronous, where replication to DR can be asynchronous. However, consideration of storage loads are required to insure that storage data can keep up with the rate of data change.

Foundation Pack Equipment

The Anvil! is, fundamentally, hardware agnostic. That said, the hardware you select must be configured to meet the Anvil! requirements.

As we are hardware agnostic, we've created three linked pages. As we validate hardware ourselves, we will expand hardware-specific configuration guides. If you've configured foundation pack equipment not in the pages below, and you are willing, we would love to add your configuration instructions to our list.

Striker, Node and DR Host Configuration

In UEFI (BIOS), configure;

  • Striker Dashboards to power on after power loss in all cases.
  • Configure Subnodes to stay powered off after power loss in all cases.
  • Configure any machines with redundant PSUs to balance the load across PSUs (don't use "hot spare" where only one PSU is active carrying the full load)

If using RAID

  • If you have two drives, configure RAID level 1 (mirroring)
  • If using 3 to 8 drives, configure RAID level 5 (striping with N-1 parity)
  • If using 9+ drives, configure RAID level 6 (striping with N-2 parity)

Note that a server on a given node-pair will have it's data mirrored, effectively creating a sort of RAID level 11 (mirror of mirrors), 15 (mirror of N-1 stripes) or 16 (mirror of N-2 stripes). This is why we're comfortable pushing RAID level 5 to 8 disks.

Installation of Base OS

For all three machine types; (striker dashboards, node-pair sub-node, dr host), begin with a minimal RHEL 8 or CentOS Stream 8 install.

Template note icon.svg
Note: This tutorial assumes an existing understanding of installed RHEL 8. If you are new to RHEL, you can setup a free Red Hat account, and then follow their installation guide.

Base OS Install

Template note icon.svg
Note: Every effort has been made in the development of the Anvil! to ensure it will work with localisations. However, parsing of command output has been tested with Canadian and American English. As such, it is recommended that you install using one of these localisations. If you use a different localisation, and run into any problems, please let us know and we will try to add support.

Localisation

Choose your localisation;

Localisation selection.

KDUMP

Disable kdump; This prevents kernel dumps if the OS crashes, but it means the host will recover faster. If you want to leave kdump enabled, that is fine, but be aware of the slower recovery times. Note that a subnode getting fenced will be forced off, and so kernel dumps won't be collected regardless of this configuration.

Disable kdump.

Network & Host Name

Set the host name for the machine. It's useful to do this before configuring the network, so that the volume group name includes the host's short host name. This doesn't effect the operation of the Anvil! system, but it can assist with debugging down the road.

Template note icon.svg
Note: Don't worry about configuring the network, this will be handles by the Anvil! later. Setting the IFN IP at this stage can be useful, but is not required.
Set the host name.

Time & Date

Setting the timezone is very much specific to you and your install. The most important part is that the time zone is set consistently across all machines in the Anvil! cluster.

Setting the timezone consistently on all Anvil! cluster systems.

Software Selection

All machines can start with a Minimal Install. On Strikers, if you'd prefer to use Server With GUI, that is fine, but it is not needed at this step. The anvil-striker RPM will pull in the graphical interface.

Template note icon.svg
Note: If you select a graphical install on a Striker Dashboard, create a user called admin and set a password for that user.
Selecting the Minimal Install.

Installation Destination

Template note icon.svg
Note: It is strongly suggested to set the host name before configuring storage.
Template note icon.svg
Note: This is where the installation of a Striker dashboard will differ from an Anvil! Node's sub-node or DR host

In this example, there is a single hard drive that will be configured. It's entirely valid to have a dedicated OS drive, and using a second drive for hosting servers. If you're planning to use a different storage plan, then you can ignore this stage. The key requirement is that there is unused space sufficiently large to host the servers you plan to run on a given node or DR host.

Striker Dashboards Anvil! Subnodes and DR Hosts
Striker Dashboard Drive Selection.
Subnode or DR Host Drive Selection.

Click on Click here to create them automatically. This will create the base storage configuration, which we will adapt.

Striker Dashboards Anvil! Subnodes and DR Hosts
Striker Dashboard auto-configured disk layout.
Subnode or DR Host auto-configured disk layout.

In all cases, the auto-created /home logical volume will be deleted.

  • For Striker dashboards, after deleting /home, assign the freed space to the / partition. To do this, select the / partition, and set the Desired Capacity to some much larger size than is available (like 1TiB), and click on Update Setting. The size will change to the largest valid value.
  • For Anvil! subnodes and DR hosts, simply delete the /home partition, and do not give the free space to /. The space freed up by deleting /home will be used later for hosting servers.
Striker Dashboards Anvil! Subnodes and DR Hosts
Striker Dashboard /home LV deleted.
Subnode or DR Host /home LV deleted.

From this point forward, the rest of the OS install is the same for all systems.

Optional; Connect to Red Hat

If you are installing RHEL 8, as opposed to CentOS Stream 8, you can register the server during installation. If you don't do this, the Anvil! will give you a chance to register the server during the installation process also.

Registering the system with Red Hat.

Root Password

Set the root user password.

Setting the root user password.

Begin Installation

With everything selected, click on Begin Installation. When the install has completed, reboot into the minimal install.

Ready to install!

Post OS Install Configuration

Setting up the Alteeve repos is the same, but after that, the steps start to diverge depending on which machine type we're setting up in the Anvil! cluster.

Installing the Alteeve Repo

Template note icon.svg
Note: Our repo pulls in a bunch of other packages that will be needed shortly.

There are two Alteeve repositories that you can install; Community and Enterprise. Which is used is selected after the repository RPM is installed. Lets install the repo RPM, and then we will discuss the differences before we select one.

dnf install https://www.alteeve.com/an-repo/m3/anvil-release-latest.noarch.rpm
Updating Subscription Management repositories.
Last metadata expiration check: 0:39:42 ago on Fri 28 Jul 2023 04:21:39 PM EDT.
anvil-release-latest.noarch.rpm                                                                    59 kB/s |  12 kB     00:00    
Dependencies resolved.
==================================================================================================================================
 Package                         Arch      Version                                      Repository                           Size
==================================================================================================================================
Installing:
 alteeve-release                 noarch    0.1-2                                        @commandline                         12 k
Installing dependencies:
 dwz                             x86_64    0.12-10.el8                                  rhel-8-for-x86_64-appstream-rpms    109 k
 efi-srpm-macros                 noarch    3-3.el8                                      rhel-8-for-x86_64-appstream-rpms     22 k
 ghc-srpm-macros                 noarch    1.4.2-7.el8                                  rhel-8-for-x86_64-appstream-rpms    9.4 k
 go-srpm-macros                  noarch    2-17.el8                                     rhel-8-for-x86_64-appstream-rpms     13 k
 make                            x86_64    1:4.2.1-11.el8                               rhel-8-for-x86_64-baseos-rpms       498 k
 ocaml-srpm-macros               noarch    5-4.el8                                      rhel-8-for-x86_64-appstream-rpms    9.5 k
 openblas-srpm-macros            noarch    2-2.el8                                      rhel-8-for-x86_64-appstream-rpms    8.0 k
 perl                            x86_64    4:5.26.3-422.el8                             rhel-8-for-x86_64-appstream-rpms     73 k
<...snip...> 
 perl-version                    x86_64    6:0.99.24-1.el8                              rhel-8-for-x86_64-appstream-rpms     67 k
 python-rpm-macros               noarch    3-45.el8                                     rhel-8-for-x86_64-appstream-rpms     16 k
 python-srpm-macros              noarch    3-45.el8                                     rhel-8-for-x86_64-appstream-rpms     16 k
 python3-pyparsing               noarch    2.1.10-7.el8                                 rhel-8-for-x86_64-baseos-rpms       142 k
 python3-rpm-macros              noarch    3-45.el8                                     rhel-8-for-x86_64-appstream-rpms     15 k
 qt5-srpm-macros                 noarch    5.15.3-1.el8                                 rhel-8-for-x86_64-appstream-rpms     11 k
 redhat-rpm-config               noarch    131-1.el8                                    rhel-8-for-x86_64-appstream-rpms     91 k
 rust-srpm-macros                noarch    5-2.el8                                      rhel-8-for-x86_64-appstream-rpms    9.3 k
 systemtap-sdt-devel             x86_64    4.8-2.el8                                    rhel-8-for-x86_64-appstream-rpms     88 k
 unzip                           x86_64    6.0-46.el8                                   rhel-8-for-x86_64-baseos-rpms       196 k
 zip                             x86_64    3.0-23.el8                                   rhel-8-for-x86_64-baseos-rpms       270 k
Installing weak dependencies:
 perl-Encode-Locale              noarch    1.05-10.module+el8.3.0+6498+9eecfe51         rhel-8-for-x86_64-appstream-rpms     22 k
 perl-IO-Socket-SSL              noarch    2.066-4.module+el8.3.0+6446+594cad75         rhel-8-for-x86_64-appstream-rpms    298 k
 perl-Mozilla-CA                 noarch    20160104-7.module+el8.3.0+6498+9eecfe51      rhel-8-for-x86_64-appstream-rpms     15 k
 perl-TermReadKey                x86_64    2.37-7.el8                                   rhel-8-for-x86_64-appstream-rpms     40 k
Enabling module streams:
 perl                                      5.26                                                                                  
 perl-IO-Socket-SSL                        2.066                                                                                 
 perl-libwww-perl                          6.34                                                                                  

Transaction Summary
==================================================================================================================================
Install  159 Packages

Total size: 23 M
Total download size: 23 M
Installed size: 64 M
Is this ok [y/N]:
Downloading Packages:
(1/158): perl-Scalar-List-Utils-1.49-2.el8.x86_64.rpm                                             173 kB/s |  68 kB     00:00    
(2/158): perl-Data-Dumper-2.167-399.el8.x86_64.rpm                                                147 kB/s |  58 kB     00:00    
(3/158): perl-PathTools-3.74-1.el8.x86_64.rpm                                                     155 kB/s |  90 kB     00:00    
(4/158): perl-threads-shared-1.58-2.el8.x86_64.rpm                                                127 kB/s |  48 kB     00:00    
(5/158): perl-Unicode-Normalize-1.25-396.el8.x86_64.rpm                                           431 kB/s |  82 kB     00:00    
(6/158): zip-3.0-23.el8.x86_64.rpm                                                                896 kB/s | 270 kB     00:00    
(7/158): perl-MIME-Base64-3.15-396.el8.x86_64.rpm                                                 101 kB/s |  31 kB     00:00    
(8/158): perl-Pod-Simple-3.35-395.el8.noarch.rpm                                                  879 kB/s | 213 kB     00:00    
<...snip...> 
(156/158): python-srpm-macros-3-45.el8.noarch.rpm                                                  65 kB/s |  16 kB     00:00    
(157/158): perl-open-1.11-422.el8.noarch.rpm                                                      818 kB/s |  78 kB     00:00    
(158/158): perl-utils-5.26.3-422.el8.noarch.rpm                                                   269 kB/s | 129 kB     00:00    
----------------------------------------------------------------------------------------------------------------------------------
Total                                                                                             1.6 MB/s |  23 MB     00:14     
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
  Preparing        :                                                                                                          1/1 
  Installing       : perl-Digest-1.17-395.el8.noarch                                                                        1/159 
  Installing       : perl-Digest-MD5-2.55-396.el8.x86_64                                                                    2/159 
  Installing       : perl-Data-Dumper-2.167-399.el8.x86_64                                                                  3/159 
  Installing       : perl-libnet-3.11-3.el8.noarch                                                                          4/159 
  Installing       : perl-Net-SSLeay-1.88-2.module+el8.6.0+13392+f0897f98.x86_64                                            5/159 
<...snip...> 
  Installing       : perl-CPAN-2.18-397.el8.noarch                                                                        156/159 
  Installing       : perl-Encode-devel-4:2.97-3.el8.x86_64                                                                157/159 
  Installing       : perl-4:5.26.3-422.el8.x86_64                                                                         158/159 
  Installing       : alteeve-release-0.1-2.noarch                                                                         159/159 
  Running scriptlet: alteeve-release-0.1-2.noarch                                                                         159/159 
  Verifying        : perl-Scalar-List-Utils-3:1.49-2.el8.x86_64                                                             1/159 
  Verifying        : perl-PathTools-3.74-1.el8.x86_64                                                                       2/159 
  Verifying        : perl-Data-Dumper-2.167-399.el8.x86_64                                                                  3/159 
  Verifying        : perl-threads-shared-1.58-2.el8.x86_64                                                                  4/159 
  Verifying        : perl-Encode-4:2.97-3.el8.x86_64                                                                        5/159 
<...snip...> 
  Verifying        : python-srpm-macros-3-45.el8.noarch                                                                   155/159 
  Verifying        : perl-SelfLoader-1.23-422.el8.noarch                                                                  156/159 
  Verifying        : perl-open-1.11-422.el8.noarch                                                                        157/159 
  Verifying        : perl-utils-5.26.3-422.el8.noarch                                                                     158/159 
  Verifying        : alteeve-release-0.1-2.noarch                                                                         159/159 
Installed products updated.

Installed:
  alteeve-release-0.1-2.noarch                                    dwz-0.12-10.el8.x86_64                                         
  efi-srpm-macros-3-3.el8.noarch                                  ghc-srpm-macros-1.4.2-7.el8.noarch                             
<...snip...> 
  redhat-rpm-config-131-1.el8.noarch                              rust-srpm-macros-5-2.el8.noarch                                
  systemtap-sdt-devel-4.8-2.el8.x86_64                            unzip-6.0-46.el8.x86_64                                        
  zip-3.0-23.el8.x86_64                                          

Complete!

Selecting a Repository

There are two released version of the Anvil! cluster. There are pros and cons to both options;

Community Repo

The Community repository is the free repo that anyone can use. As new builds pass our CI/CD test infrastructure, the versions in this repository are automatically built.

This repository always has the latest and greatest from Alteeve. We use Jenkins and a suite of proprietary test suite to ensure that the quality of the releases is excellent. Of course, Alteeve is a company of humans, and there's always a small chance that a bug could get through. Our free community repository is community supported, and it's our wonderful users who help us improve and refine our Anvil! platform.

Enterprise Repo

The Enterprise repository is the paid-access repository. The releases in the enterprise repo are "cherry picked" by Alteeve, and subjected to more extensive testing and QA. This repo is designed for businesses who want the most stable releases.

Using this repo opens up the option of active monitoring of your Anvil! cluster by Alteeve, also!

If you choose to get the Enterprise repo, please contact us and we will provide you with a custome repository key.

Configuring the Alteeve Repo

To configure the repo, we will use the alteeve-repo-setup program that was just installed.

You can see a full list of options, including the use of the --key <uuid> to enable to Enterprise Repo. For this tutorial, we will configure the community repo.

alteeve-repo-setup
You have not specified an Enterprise repo key. This will enable the community
repository. We work quite hard to make it as stable as we possibly can, but it
does lead Enterprise.
Proceed? [y/N]:
Writing: [/etc/yum.repos.d/alteeve-anvil.repo]...
Repo: [rhel-8] created successfuly.

This is RHEL 8. Once subscribed, please enable this repo;
# subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms

NOTE: On *nodes*, also add the High-Availability Addon repo as well;
# subscription-manager repos --enable rhel-8-for-x86_64-highavailability-rpms

If you are installing using CentOS Stream 8, you are done now and can move on.

RHEL 8 Additional Repos

If you are using RHEL 8 proper, with the system now subscribed, we now need to enable additional repositories

On all systems;

subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms
Repository 'codeready-builder-for-rhel-8-x86_64-rpms' is enabled for this system.

On Anvil! subnodes only, not Striker dashboards or DR hosts.

subscription-manager repos --enable rhel-8-for-x86_64-highavailability-rpms
Repository 'rhel-8-for-x86_64-highavailability-rpms' is enabled for this system.
Is this ok [y/N]:
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
  Preparing        :                                                                                                          1/1 
  Erasing          : biosdevname-0.7.3-2.el8.x86_64                                                                           1/1 
  Running scriptlet: biosdevname-0.7.3-2.el8.x86_64                                                                           1/1 
  Verifying        : biosdevname-0.7.3-2.el8.x86_64                                                                           1/1 
Installed products updated.

Removed:
  biosdevname-0.7.3-2.el8.x86_64                                                                                                  

Complete!

Installing Anvil! Packages

This is the step where, from a software perspective, Anvil! cluster systems differentiate to become Striker Dashboards, Anvil! subnodes, and DR hosts. Which a given machine becomes depends on which RPM is installed. The three RPMs that set a machine's role are;

Striker Dashboards: anvil-striker
Anvil! Subnodes: anvil-node
DR Hosts: anvil-dr

Removing biosdevname

Template note icon.svg
Note: When M3 is ported to EL9, the network interfaces will no longer be renamed in the same manner, and removing biosdevname will no longer be required.

Before we can install these RPMs, though, we need to remove the package called biosdevname. Anvil! M3 on EL8 renames the network interfaces to reflect their role. By default, network interfaces are named using predictive names based on their physical location in the machine. Removing this package disables that feature and allows us to rename the interfaces

dnf remove biosdevname
Is this ok [y/N]:
Updating Subscription Management repositories.
Dependencies resolved.
-=================================================================================================================================
 Package                    Architecture          Version                     Repository                                     Size
-=================================================================================================================================
Removing:
 biosdevname                x86_64                0.7.3-2.el8                 @rhel-8-for-x86_64-baseos-rpms                 67 k

Transaction Summary
-=================================================================================================================================
Remove  1 Package

Freed space: 67 k

Striker Dashboards; Installing anvil-striker

Now we're ready to install!

Template note icon.svg
Note: Given the install of the OS was minimal, these RPMs pull in a lot of RPMs. The output below is truncated.

Thus, let's install the RPMs on our systems.

dnf install anvil-striker
Updating Subscription Management repositories.
Last metadata expiration check: 0:07:31 ago on Fri 28 Jul 2023 06:00:20 PM EDT.
Dependencies resolved.
-=================================================================================================================================
 Package                         Arch   Version                                    Repository                                Size
-=================================================================================================================================
Installing:
 anvil-striker                   noarch 2.90-1.2704.25b460.el8                     anvil-community-rhel-8                   3.7 M
Installing dependencies:
 GConf2                          x86_64 3.2.6-22.el8                               rhel-8-for-x86_64-appstream-rpms         1.0 M
 ModemManager-glib               x86_64 1.20.2-1.el8                               rhel-8-for-x86_64-baseos-rpms            338 k
 NetworkManager-initscripts-updown
                                 noarch 1:1.40.16-3.el8_8                          rhel-8-for-x86_64-baseos-rpms            143 k
 SDL                             x86_64 1.2.15-39.el8                              rhel-8-for-x86_64-appstream-rpms         218 k
<...snip...>
 telnet                          x86_64 1:0.17-76.el8                              rhel-8-for-x86_64-appstream-rpms          72 k
 vino                            x86_64 3.22.0-11.el8                              rhel-8-for-x86_64-appstream-rpms         461 k
 xorg-x11-server-Xorg            x86_64 1.20.11-15.el8                             rhel-8-for-x86_64-appstream-rpms         1.5 M
Enabling module streams:
 llvm-toolset                           rhel8                                                                                    
 nodejs                                 10                                                                                       
 perl-App-cpanminus                     1.7044                                                                                   
 perl-DBD-Pg                            3.7                                                                                      
 perl-DBI                               1.641                                                                                    
 perl-YAML                              1.24                                                                                     
 postgresql                             10                                                                                       
 python36                               3.6                                                                                      

Transaction Summary
-=================================================================================================================================
Install  686 Packages

Total download size: 601 M
Installed size: 2.1 G
Is this ok [y/N]:
Downloading Packages:
(1/686): htop-3.2.1-1.el8.x86_64.rpm                                                              549 kB/s | 172 kB     00:00    
(2/686): perl-Algorithm-C3-0.11-6.el8.noarch.rpm                                                  457 kB/s |  29 kB     00:00    
(3/686): perl-Class-C3-0.35-6.el8.noarch.rpm                                                      781 kB/s |  37 kB     00:00    
(4/686): perl-Data-Dumper-Concise-2.023-16.el8.noarch.rpm                                         503 kB/s |  26 kB     00:00    
(5/686): anvil-core-2.90-1.2704.25b460.el8.noarch.rpm                                             2.0 MB/s | 1.0 MB     00:00    
(6/686): perl-Data-Validate-Domain-0.15-2.el8.noarch.rpm                                          598 kB/s |  28 kB     00:00    
(7/686): perl-Data-Validate-IP-0.30-4.el8.noarch.rpm                                              581 kB/s |  33 kB     00:00    
(8/686): perl-Devel-ArgNames-0.03-23.el8.noarch.rpm                                               233 kB/s |  13 kB     00:00    
(9/686): perl-Email-Date-Format-1.005-21.el8.noarch.rpm                                           368 kB/s |  22 kB     00:00    
(10/686): perl-Email-Find-0.10-39.el8.noarch.rpm                                                  505 kB/s |  23 kB     00:00    
(11/686): anvil-striker-2.90-1.2704.25b460.el8.noarch.rpm                                         5.7 MB/s | 3.7 MB     00:00    
(12/686): perl-Email-Valid-1.202-17.el8.noarch.rpm                                                675 kB/s |  28 kB     00:00    
(13/686): perl-Eval-WithLexicals-1.003006-15.el8.noarch.rpm                                       508 kB/s |  21 kB     00:00    
(14/686): perl-Exporter-Declare-0.114-19.el8.noarch.rpm                                           1.1 MB/s |  51 kB     00:00    
(15/686): perl-Future-0.48-1.el8.noarch.rpm                                                       2.1 MB/s | 106 kB     00:00    
(16/686): perl-HTML-FromText-2.07-23.el8.noarch.rpm                                               591 kB/s |  26 kB     00:00    
(17/686): perl-HTML-Strip-2.10-21.el8.x86_64.rpm                                                  713 kB/s |  31 kB     00:00    
(18/686): perl-Log-Contextual-0.008001-14.el8.noarch.rpm                                          1.2 MB/s |  67 kB     00:00    
(19/686): perl-Log-Dispatch-2.70-6.el8.noarch.rpm                                                 1.7 MB/s |  91 kB     00:00    
(20/686): perl-Log-Dispatch-FileRotate-1.38-3.el8.noarch.rpm                                      896 kB/s |  38 kB     00:00    
(21/686): perl-Log-Journald-0.30-2.el8.x86_64.rpm                                                 715 kB/s |  27 kB     00:00    
(22/686): perl-MIME-Lite-3.033-3.el8.noarch.rpm                                                   2.2 MB/s | 103 kB     00:00    
(23/686): perl-Mail-RFC822-Address-0.3-37.el8.noarch.rpm                                          392 kB/s |  18 kB     00:00    
(24/686): perl-Log-Log4perl-1.54-4.el8.noarch.rpm                                                 4.1 MB/s | 376 kB     00:00    
(25/686): perl-Mail-Sendmail-0.80-14.el8.noarch.rpm                                               922 kB/s |  41 kB     00:00    
(26/686): perl-Meta-Builder-0.004-11.el8.noarch.rpm                                               598 kB/s |  27 kB     00:00    
(27/686): perl-Moo-2.005004-4.el8.noarch.rpm                                                      1.6 MB/s |  74 kB     00:00    
(28/686): perl-Net-Domain-TLD-1.75-17.el8.noarch.rpm                                              829 kB/s |  41 kB     00:00    
(29/686): perl-Net-Netmask-2.0001-4.el8.noarch.rpm                                                1.0 MB/s |  47 kB     00:00    
(30/686): perl-Net-OpenSSH-0.82-1.el8.noarch.rpm                                                  2.4 MB/s | 120 kB     00:00    
(31/686): perl-Net-SSH2-0.72-5.el8.x86_64.rpm                                                     2.5 MB/s | 129 kB     00:00    
(32/686): perl-Object-Remote-0.004001-8.el8.noarch.rpm                                            1.6 MB/s |  73 kB     00:00    
(33/686): perl-Proc-Simple-1.32-18.el8.noarch.rpm                                                 573 kB/s |  28 kB     00:00    
(34/686): perl-Sub-Quote-2.006006-8.el8.noarch.rpm                                                812 kB/s |  36 kB     00:00    
(35/686): perl-Role-Tiny-2.002004-5.el8.noarch.rpm                                                725 kB/s |  39 kB     00:00    
(36/686): perl-UUID-Tiny-1.04-25.el8.noarch.rpm                                                   632 kB/s |  26 kB     00:00    
(37/686): perl-aliased-0.34-21.el8.noarch.rpm                                                     659 kB/s |  30 kB     00:00    
(38/686): perl-strictures-2.000006-13.el8.noarch.rpm                                              779 kB/s |  35 kB     00:00    
(39/686): screen-4.9.0-1.el8.x86_64.rpm                                                           6.7 MB/s | 584 kB     00:00    
(40/686): perl-Package-Stash-XS-0.28-17.el8.x86_64.rpm                                             83 kB/s |  38 kB     00:00    
(41/686): perl-Devel-LexAlias-0.05-16.el8.x86_64.rpm                                               25 kB/s |  20 kB     00:00    
(42/686): perl-Ref-Util-XS-0.117-2.el8.x86_64.rpm                                                  57 kB/s |  26 kB     00:00    
(43/686): perl-PadWalker-2.3-2.el8.x86_64.rpm                                                      44 kB/s |  31 kB     00:00    
(44/686): perl-Devel-Caller-2.06-15.el8.x86_64.rpm                                                 13 kB/s |  23 kB     00:01    
(45/686): perl-Variable-Magic-0.62-3.el8.x86_64.rpm                                               286 kB/s |  59 kB     00:00    
(46/686): perl-Params-Validate-1.29-5.el8.x86_64.rpm                                               88 kB/s |  80 kB     00:00    
(47/686): perl-Eval-Closure-0.14-5.el8.noarch.rpm                                                 148 kB/s |  28 kB     00:00    
(48/686): perl-Package-Stash-0.37-9.el8.noarch.rpm                                                136 kB/s |  42 kB     00:00    
(49/686): perl-MIME-Types-2.17-3.el8.noarch.rpm                                                    78 kB/s |  77 kB     00:00    
(50/686): perl-Sub-Identify-0.14-6.el8.x86_64.rpm                                                 8.0 kB/s |  29 kB     00:03    
(51/686): perl-B-Hooks-EndOfScope-0.21-6.el8.noarch.rpm                                            53 kB/s |  42 kB     00:00    
(52/686): perl-Module-Implementation-0.09-15.el8.noarch.rpm                                        22 kB/s |  24 kB     00:01    
(53/686): perl-Params-ValidationCompiler-0.27-1.el8.noarch.rpm                                     57 kB/s |  38 kB     00:00    
(54/686): perl-File-MimeInfo-0.28-7.el8.noarch.rpm                                                 33 kB/s |  56 kB     00:01    
(55/686): perl-Sub-Exporter-Progressive-0.001013-5.el8.noarch.rpm                                  45 kB/s |  25 kB     00:00    
(56/686): perl-Digest-SHA1-2.13-23.el8.x86_64.rpm                                                  76 kB/s |  57 kB     00:00    
(57/686): perl-IO-Tty-1.12-11.el8.x86_64.rpm                                                      256 kB/s |  48 kB     00:00    
(58/686): perl-Import-Into-1.002005-7.el8.noarch.rpm                                               15 kB/s |  20 kB     00:01    
(59/686): perl-namespace-autoclean-0.28-10.el8.noarch.rpm                                         119 kB/s |  32 kB     00:00    
(60/686): perl-Devel-GlobalDestruction-0.14-5.el8.noarch.rpm                                       88 kB/s |  24 kB     00:00    
(61/686): perl-File-BaseDir-0.08-1.el8.noarch.rpm                                                  21 kB/s |  23 kB     00:01    
(62/686): perl-Class-Data-Inheritable-0.08-27.el8.noarch.rpm                                       91 kB/s |  17 kB     00:00    
(63/686): perltidy-20180220-1.el8.noarch.rpm                                                      216 kB/s | 428 kB     00:01    
(64/686): perl-Ref-Util-0.203-4.el8.noarch.rpm                                                     66 kB/s |  27 kB     00:00    
(65/686): perl-Dist-CheckConflicts-0.11-11.el8.noarch.rpm                                          42 kB/s |  27 kB     00:00    
(66/686): perl-Exception-Class-1.44-2.el8.noarch.rpm                                               44 kB/s |  50 kB     00:01    
(67/686): perl-Specio-0.42-2.el8.noarch.rpm                                                       846 kB/s | 159 kB     00:00    
(68/686): perl-Devel-StackTrace-2.03-2.el8.noarch.rpm                                              52 kB/s |  35 kB     00:00    
(69/686): perl-Class-Method-Modifiers-2.12-8.el8.noarch.rpm                                        41 kB/s |  49 kB     00:01    
(70/686): perl-namespace-clean-0.27-7.el8.noarch.rpm                                              192 kB/s |  37 kB     00:00    
(71/686): perl-Capture-Tiny-0.46-4.el8.noarch.rpm                                                  21 kB/s |  39 kB     00:01    
(72/686): lzop-1.03-20.el8.x86_64.rpm                                                             330 kB/s |  62 kB     00:00    
(73/686): perl-File-DesktopEntry-0.22-7.el8.noarch.rpm                                             26 kB/s |  27 kB     00:01    
(74/686): tcl-8.6.8-2.el8.x86_64.rpm                                                              3.5 MB/s | 1.1 MB     00:00    
(75/686): libfdt-1.6.0-1.el8.x86_64.rpm                                                            25 kB/s |  32 kB     00:01    
(76/686): libmodman-2.0.1-17.el8.x86_64.rpm                                                        92 kB/s |  36 kB     00:00    
(77/686): libproxy-0.4.15-5.2.el8.x86_64.rpm                                                      240 kB/s |  74 kB     00:00    
(78/686): libmetalink-0.1.3-7.el8.x86_64.rpm                                                      107 kB/s |  32 kB     00:00    
(79/686): libappstream-glib-0.7.14-3.el8.x86_64.rpm                                               912 kB/s | 338 kB     00:00    
(80/686): libical-3.0.3-3.el8.x86_64.rpm                                                          207 kB/s | 279 kB     00:01    
(81/686): numad-0.5-26.20150602git.el8.x86_64.rpm                                                 338 kB/s |  41 kB     00:00    
(82/686): usbutils-010-3.el8.x86_64.rpm                                                           1.0 MB/s | 108 kB     00:00    
(83/686): fontpackages-filesystem-1.44-22.el8.noarch.rpm                                           67 kB/s |  16 kB     00:00    
(84/686): perl-Date-Manip-6.60-2.el8.noarch.rpm                                                   4.5 MB/s | 1.1 MB     00:00    
(85/686): bzip2-1.0.6-26.el8.x86_64.rpm                                                           172 kB/s |  60 kB     00:00    
(86/686): libstemmer-0-10.585svn.el8.x86_64.rpm                                                   771 kB/s |  73 kB     00:00    
(87/686): bash-completion-2.7-5.el8.noarch.rpm                                                    1.4 MB/s | 274 kB     00:00    
(88/686): m4-1.4.18-7.el8.x86_64.rpm                                                              1.0 MB/s | 223 kB     00:00    
(89/686): expect-5.45.4-5.el8.x86_64.rpm                                                          981 kB/s | 267 kB     00:00    
(90/686): iw-4.14-5.el8.x86_64.rpm                                                                281 kB/s |  90 kB     00:00    
(91/686): xml-common-0.6.3-50.el8.noarch.rpm                                                      291 kB/s |  39 kB     00:00    
(92/686): mailcap-2.1.48-3.el8.noarch.rpm                                                         265 kB/s |  39 kB     00:00    
(93/686): mailx-12.5-29.el8.x86_64.rpm                                                            1.6 MB/s | 257 kB     00:00    
(94/686): libpciaccess-0.14-1.el8.x86_64.rpm                                                      299 kB/s |  32 kB     00:00    
(95/686): tmux-2.7-1.el8.x86_64.rpm                                                               1.4 MB/s | 317 kB     00:00    
(96/686): libtool-ltdl-2.4.6-25.el8.x86_64.rpm                                                    261 kB/s |  58 kB     00:00    
(97/686): glib-networking-2.56.1-1.1.el8.x86_64.rpm                                               1.3 MB/s | 155 kB     00:00    
(98/686): redhat-indexhtml-8-7.el8.noarch.rpm                                                     209 kB/s | 242 kB     00:01    
(99/686): isns-utils-libs-0.99-1.el8.x86_64.rpm                                                   1.2 MB/s | 105 kB     00:00    
(100/686): gdk-pixbuf2-2.36.12-5.el8.x86_64.rpm                                                   1.3 MB/s | 467 kB     00:00    
(101/686): lsof-4.93.2-1.el8.x86_64.rpm                                                           1.3 MB/s | 253 kB     00:00    
(102/686): p11-kit-server-0.23.22-1.el8.x86_64.rpm                                                960 kB/s | 179 kB     00:00    
(103/686): libicu-60.3-2.el8_1.x86_64.rpm                                                          14 MB/s | 8.8 MB     00:00    
(104/686): smartmontools-7.1-1.el8.x86_64.rpm                                                     959 kB/s | 544 kB     00:00    
(105/686): dejavu-fonts-common-2.35-7.el8.noarch.rpm                                              391 kB/s |  74 kB     00:00    
(106/686): dejavu-serif-fonts-2.35-7.el8.noarch.rpm                                               2.0 MB/s | 805 kB     00:00    
(107/686): userspace-rcu-0.10.1-4.el8.x86_64.rpm                                                  1.0 MB/s | 101 kB     00:00    
(108/686): libxslt-1.1.32-6.el8.x86_64.rpm                                                        1.7 MB/s | 250 kB     00:00    
(109/686): avahi-libs-0.7-20.el8.x86_64.rpm                                                       487 kB/s |  62 kB     00:00    
(110/686): dejavu-sans-mono-fonts-2.35-7.el8.noarch.rpm                                           3.1 MB/s | 447 kB     00:00    
(111/686): avahi-glib-0.7-20.el8.x86_64.rpm                                                        44 kB/s |  14 kB     00:00    
(112/686): crda-3.18_2020.04.29-1.el8.noarch.rpm                                                  193 kB/s |  24 kB     00:00    
(113/686): python3-ply-3.9-9.el8.noarch.rpm                                                       979 kB/s | 111 kB     00:00    
(114/686): libxcrypt-devel-4.1.1-6.el8.x86_64.rpm                                                 135 kB/s |  25 kB     00:00    
(115/686): bolt-0.9.1-1.el8.x86_64.rpm                                                            752 kB/s | 201 kB     00:00    
(116/686): dejavu-sans-fonts-2.35-7.el8.noarch.rpm                                                5.8 MB/s | 1.5 MB     00:00    
(117/686): keyutils-1.5.10-9.el8.x86_64.rpm                                                       677 kB/s |  66 kB     00:00    
(118/686): libsepol-devel-2.9-3.el8.x86_64.rpm                                                    897 kB/s |  87 kB     00:00    
(119/686): gsettings-desktop-schemas-3.32.0-6.el8.x86_64.rpm                                      3.0 MB/s | 633 kB     00:00    
(120/686): quota-nls-4.04-14.el8.noarch.rpm                                                       461 kB/s |  95 kB     00:00    
(121/686): keyutils-libs-devel-1.5.10-9.el8.x86_64.rpm                                            129 kB/s |  48 kB     00:00    
(122/686): redhat-logos-84.5-1.el8.x86_64.rpm                                                     2.5 MB/s | 364 kB     00:00    
(123/686): glusterfs-6.0-56.4.el8.x86_64.rpm                                                      5.1 MB/s | 667 kB     00:00    
(124/686): glusterfs-libs-6.0-56.4.el8.x86_64.rpm                                                 3.5 MB/s | 418 kB     00:00    
(125/686): iscsi-initiator-utils-iscsiuio-6.2.1.4-4.git095f59c.el8.x86_64.rpm                     1.1 MB/s | 100 kB     00:00    
(126/686): freeipmi-1.6.8-1.el8.x86_64.rpm                                                        7.4 MB/s | 2.1 MB     00:00    
(127/686): iscsi-initiator-utils-6.2.1.4-4.git095f59c.el8.x86_64.rpm                              1.4 MB/s | 378 kB     00:00    
(128/686): cyrus-sasl-plain-2.1.27-6.el8_5.x86_64.rpm                                             254 kB/s |  48 kB     00:00    
(129/686): mobile-broadband-provider-info-20210805-1.el8.noarch.rpm                               196 kB/s |  77 kB     00:00    
(130/686): cyrus-sasl-2.1.27-6.el8_5.x86_64.rpm                                                   442 kB/s |  96 kB     00:00    
(131/686): quota-4.04-14.el8.x86_64.rpm                                                           2.3 MB/s | 214 kB     00:00    
(132/686): cyrus-sasl-gssapi-2.1.27-6.el8_5.x86_64.rpm                                            505 kB/s |  50 kB     00:00    
(133/686): glusterfs-client-xlators-6.0-56.4.el8.x86_64.rpm                                       6.2 MB/s | 883 kB     00:00    
(134/686): fontconfig-2.13.1-4.el8.x86_64.rpm                                                     1.1 MB/s | 274 kB     00:00    
(135/686): cyrus-sasl-md5-2.1.27-6.el8_5.x86_64.rpm                                               272 kB/s |  66 kB     00:00    
(136/686): wpa_supplicant-2.10-1.el8.x86_64.rpm                                                   8.8 MB/s | 2.1 MB     00:00    
(137/686): syslinux-nonlinux-6.04-6.el8.noarch.rpm                                                2.9 MB/s | 555 kB     00:00    
(138/686): pcre2-utf32-10.32-3.el8_6.x86_64.rpm                                                   913 kB/s | 220 kB     00:00    
(139/686): postfix-3.5.8-4.el8.x86_64.rpm                                                         6.1 MB/s | 1.5 MB     00:00    
(140/686): fuse-common-3.3.0-16.el8.x86_64.rpm                                                    255 kB/s |  22 kB     00:00    
(141/686): pcre2-devel-10.32-3.el8_6.x86_64.rpm                                                   5.4 MB/s | 605 kB     00:00    
(142/686): pcre2-utf16-10.32-3.el8_6.x86_64.rpm                                                   2.0 MB/s | 229 kB     00:00    
(143/686): bluez-obexd-5.63-1.el8.x86_64.rpm                                                      1.4 MB/s | 233 kB     00:00    
(144/686): syslinux-6.04-6.el8.x86_64.rpm                                                         3.4 MB/s | 578 kB     00:00    
(145/686): rsync-3.1.3-19.el8_7.1.x86_64.rpm                                                      1.5 MB/s | 410 kB     00:00    
(146/686): mtools-4.0.18-15.el8_6.x86_64.rpm                                                      382 kB/s | 213 kB     00:00    
(147/686): openssl-devel-1.1.1k-9.el8_7.x86_64.rpm                                                8.8 MB/s | 2.3 MB     00:00    
(148/686): strace-5.18-2.el8.x86_64.rpm                                                           5.3 MB/s | 1.4 MB     00:00    
(149/686): libverto-devel-0.3.2-2.el8.x86_64.rpm                                                   68 kB/s |  18 kB     00:00    
(150/686): fuse-2.9.7-16.el8.x86_64.rpm                                                           432 kB/s |  83 kB     00:00    
(151/686): libcom_err-devel-1.45.6-5.el8.x86_64.rpm                                               206 kB/s |  39 kB     00:00    
(152/686): gssproxy-0.8.0-21.el8.x86_64.rpm                                                       604 kB/s | 119 kB     00:00    
(153/686): bluez-libs-5.63-1.el8.x86_64.rpm                                                       1.2 MB/s | 114 kB     00:00    
(154/686): rpcbind-1.2.5-10.el8.x86_64.rpm                                                        739 kB/s |  70 kB     00:00    
(155/686): bluez-5.63-1.el8.x86_64.rpm                                                            3.7 MB/s | 1.4 MB     00:00    
(156/686): libqb-1.0.3-13.el8_7.x86_64.rpm                                                        1.3 MB/s | 113 kB     00:00    
(157/686): zlib-devel-1.2.11-21.el8_7.x86_64.rpm                                                  460 kB/s |  58 kB     00:00    
(158/686): elfutils-libelf-devel-0.188-3.el8.x86_64.rpm                                           329 kB/s |  61 kB     00:00    
(159/686): cups-libs-2.2.6-51.el8.x86_64.rpm                                                      2.3 MB/s | 435 kB     00:00    
(160/686): samba-client-libs-4.17.5-2.el8.x86_64.rpm                                               12 MB/s | 5.0 MB     00:00    
(161/686): libwbclient-4.17.5-2.el8.x86_64.rpm                                                    668 kB/s | 125 kB     00:00    
(162/686): python3-setuptools-39.2.0-7.el8.noarch.rpm                                             811 kB/s | 163 kB     00:00    
(163/686): binutils-2.30-119.el8.x86_64.rpm                                                       7.2 MB/s | 5.8 MB     00:00    
(164/686): glibc-headers-2.28-225.el8.x86_64.rpm                                                  1.8 MB/s | 488 kB     00:00    
(165/686): nfs-utils-2.3.3-59.el8.x86_64.rpm                                                      1.9 MB/s | 515 kB     00:00    
(166/686): augeas-1.12.0-8.el8.x86_64.rpm                                                         473 kB/s |  57 kB     00:00    
(167/686): libatomic-8.5.0-18.el8.x86_64.rpm                                                      200 kB/s |  25 kB     00:00    
(168/686): device-mapper-multipath-libs-0.8.4-37.el8.x86_64.rpm                                   2.7 MB/s | 334 kB     00:00    
(169/686): net-snmp-libs-5.8-27.el8.x86_64.rpm                                                    5.0 MB/s | 827 kB     00:00    
(170/686): libselinux-devel-2.9-8.el8.x86_64.rpm                                                  1.8 MB/s | 200 kB     00:00    
(171/686): dhcp-libs-4.3.6-49.el8.x86_64.rpm                                                      1.5 MB/s | 148 kB     00:00    
(172/686): samba-common-4.17.5-2.el8.noarch.rpm                                                   2.5 MB/s | 230 kB     00:00    
(173/686): nvme-cli-1.16-7.el8.x86_64.rpm                                                         1.8 MB/s | 503 kB     00:00    
(174/686): libsoup-2.62.3-3.el8.x86_64.rpm                                                        988 kB/s | 425 kB     00:00    
(175/686): glibc-devel-2.28-225.el8.x86_64.rpm                                                    856 kB/s |  83 kB     00:00    
(176/686): device-mapper-multipath-0.8.4-37.el8.x86_64.rpm                                        1.1 MB/s | 208 kB     00:00    
(177/686): augeas-libs-1.12.0-8.el8.x86_64.rpm                                                    1.1 MB/s | 437 kB     00:00    
(178/686): yum-utils-4.0.21-19.el8_8.noarch.rpm                                                   763 kB/s |  75 kB     00:00    
(179/686): samba-common-libs-4.17.5-2.el8.x86_64.rpm                                              946 kB/s | 180 kB     00:00    
(180/686): dhcp-server-4.3.6-49.el8.x86_64.rpm                                                    2.0 MB/s | 530 kB     00:00    
(181/686): dhcp-common-4.3.6-49.el8.noarch.rpm                                                    920 kB/s | 207 kB     00:00    
(182/686): libsmbclient-4.17.5-2.el8.x86_64.rpm                                                   509 kB/s | 153 kB     00:00    
(183/686): ModemManager-glib-1.20.2-1.el8.x86_64.rpm                                              1.8 MB/s | 338 kB     00:00    
(184/686): librdmacm-44.0-2.el8.1.x86_64.rpm                                                      392 kB/s |  78 kB     00:00    
(185/686): emacs-filesystem-26.1-10.el8_8.2.noarch.rpm                                            366 kB/s |  70 kB     00:00    
(186/686): krb5-devel-1.18.2-25.el8_8.x86_64.rpm                                                  2.7 MB/s | 562 kB     00:00    
(187/686): libkadm5-1.18.2-25.el8_8.x86_64.rpm                                                    1.0 MB/s | 188 kB     00:00    
(188/686): glibc-all-langpacks-2.28-225.el8.x86_64.rpm                                             14 MB/s |  26 MB     00:01    
(189/686): iproute-tc-5.18.0-1.1.el8_8.x86_64.rpm                                                 4.3 MB/s | 466 kB     00:00    
(190/686): NetworkManager-wifi-1.40.16-3.el8_8.x86_64.rpm                                         592 kB/s | 201 kB     00:00    
(191/686): NetworkManager-initscripts-updown-1.40.16-3.el8_8.noarch.rpm                           1.4 MB/s | 143 kB     00:00    
(192/686): systemd-container-239-74.el8_8.2.x86_64.rpm                                            2.1 MB/s | 773 kB     00:00    
(193/686): bind-export-libs-9.11.36-8.el8_8.1.x86_64.rpm                                          2.2 MB/s | 1.1 MB     00:00    
(194/686): kernel-headers-4.18.0-477.15.1.el8_8.x86_64.rpm                                        9.1 MB/s |  11 MB     00:01    
(195/686): python3-pexpect-4.3.1-3.el8.noarch.rpm                                                 738 kB/s | 138 kB     00:00    
(196/686): perl-CGI-4.38-2.el8.noarch.rpm                                                         584 kB/s | 208 kB     00:00    
(197/686): perl-JSON-2.97.001-2.el8.noarch.rpm                                                    513 kB/s |  96 kB     00:00    
(198/686): perl-XML-SAX-1.00-1.el8.noarch.rpm                                                     709 kB/s |  65 kB     00:00    
(199/686): perl-Text-Unidecode-1.30-5.el8.noarch.rpm                                              796 kB/s | 149 kB     00:00    
(200/686): perl-MailTools-2.20-2.el8.noarch.rpm                                                    80 kB/s | 113 kB     00:01    
(201/686): python3-ptyprocess-0.5.2-4.el8.noarch.rpm                                              114 kB/s |  31 kB     00:00    
(202/686): kernel-devel-4.18.0-477.15.1.el8_8.x86_64.rpm                                          8.7 MB/s |  23 MB     00:02    
(203/686): urw-base35-p052-fonts-20170801-10.el8.noarch.rpm                                       2.1 MB/s | 982 kB     00:00    
(204/686): iso-codes-3.79-2.el8.noarch.rpm                                                        5.7 MB/s | 3.4 MB     00:00    
(205/686): perl-XML-Simple-2.25-1.el8.noarch.rpm                                                  455 kB/s |  87 kB     00:00    
(206/686): urw-base35-gothic-fonts-20170801-10.el8.noarch.rpm                                     1.8 MB/s | 654 kB     00:00    
(207/686): libquvi-scripts-0.9.20131130-9.el8.noarch.rpm                                          255 kB/s | 110 kB     00:00    
(208/686): urw-base35-fonts-20170801-10.el8.noarch.rpm                                             72 kB/s |  12 kB     00:00    
(209/686): geolite2-country-20180605-1.el8.noarch.rpm                                             3.6 MB/s | 1.0 MB     00:00    
(210/686): geolite2-city-20180605-1.el8.noarch.rpm                                                9.9 MB/s |  19 MB     00:01    
(211/686): color-filesystem-1-20.el8.noarch.rpm                                                    15 kB/s |  11 kB     00:00    
(212/686): perl-Module-Runtime-0.016-2.el8.noarch.rpm                                              21 kB/s |  26 kB     00:01    
(213/686): sound-theme-freedesktop-0.8-9.el8.noarch.rpm                                           527 kB/s | 382 kB     00:00    
(214/686): system-config-printer-libs-1.5.11-13.el8.noarch.rpm                                    693 kB/s | 865 kB     00:01    
(215/686): hunspell-en-0.20140811.1-12.el8.noarch.rpm                                             1.0 MB/s | 200 kB     00:00    
(216/686): google-droid-sans-fonts-20120715-13.el8.noarch.rpm                                      11 MB/s | 2.5 MB     00:00    
(217/686): urw-base35-bookman-fonts-20170801-10.el8.noarch.rpm                                    3.9 MB/s | 857 kB     00:00    
(218/686): python3-argcomplete-1.9.3-6.el8.noarch.rpm                                             322 kB/s |  60 kB     00:00    
(219/686): urw-base35-fonts-common-20170801-10.el8.noarch.rpm                                     125 kB/s |  23 kB     00:00    
(220/686): lua-json-1.3.2-9.el8.noarch.rpm                                                         24 kB/s |  29 kB     00:01    
(221/686): urw-base35-d050000l-fonts-20170801-10.el8.noarch.rpm                                   868 kB/s |  79 kB     00:00    
(222/686): urw-base35-c059-fonts-20170801-10.el8.noarch.rpm                                       5.3 MB/s | 884 kB     00:00    
(223/686): urw-base35-nimbus-mono-ps-fonts-20170801-10.el8.noarch.rpm                             3.6 MB/s | 801 kB     00:00    
(224/686): perl-Authen-SASL-2.16-13.el8.noarch.rpm                                                 50 kB/s |  57 kB     00:01    
(225/686): adobe-mappings-cmap-deprecated-20171205-3.el8.noarch.rpm                               621 kB/s | 119 kB     00:00    
(226/686): hunspell-en-GB-0.20140811.1-12.el8.noarch.rpm                                          498 kB/s | 245 kB     00:00    
(227/686): perl-Net-SMTP-SSL-1.04-5.el8.noarch.rpm                                                 75 kB/s |  15 kB     00:00    
(228/686): libavc1394-0.5.4-7.el8.x86_64.rpm                                                      307 kB/s |  61 kB     00:00    
(229/686): adobe-mappings-pdf-20180407-1.el8.noarch.rpm                                           3.6 MB/s | 707 kB     00:00    
(230/686): hicolor-icon-theme-0.17-2.el8.noarch.rpm                                               254 kB/s |  48 kB     00:00    
(231/686): hunspell-en-US-0.20140811.1-12.el8.noarch.rpm                                          293 kB/s | 196 kB     00:00    
(232/686): adobe-mappings-cmap-20171205-3.el8.noarch.rpm                                          6.9 MB/s | 2.1 MB     00:00    
(233/686): urw-base35-nimbus-sans-fonts-20170801-10.el8.noarch.rpm                                4.1 MB/s | 1.3 MB     00:00    
(234/686): urw-base35-standard-symbols-ps-fonts-20170801-10.el8.noarch.rpm                        427 kB/s |  44 kB     00:00    
(235/686): lcms2-2.9-2.el8.x86_64.rpm                                                             1.3 MB/s | 165 kB     00:00    
(236/686): urw-base35-nimbus-roman-fonts-20170801-10.el8.noarch.rpm                               5.8 MB/s | 865 kB     00:00    
(237/686): urw-base35-z003-fonts-20170801-10.el8.noarch.rpm                                       1.9 MB/s | 279 kB     00:00    
(238/686): perl-XML-NamespaceSupport-1.12-4.el8.noarch.rpm                                        232 kB/s |  30 kB     00:00    
(239/686): perl-XML-SAX-Base-1.09-4.el8.noarch.rpm                                                390 kB/s |  35 kB     00:00    
(240/686): perl-XML-LibXML-2.0132-2.el8.x86_64.rpm                                                1.6 MB/s | 372 kB     00:00    
(241/686): libusal-1.1.11-39.el8.x86_64.rpm                                                       732 kB/s | 145 kB     00:00    
(242/686): libXxf86misc-1.0.4-1.el8.x86_64.rpm                                                    123 kB/s |  23 kB     00:00    
(243/686): jbigkit-libs-2.1-14.el8.x86_64.rpm                                                     273 kB/s |  55 kB     00:00    
(244/686): libmcpp-2.7.2-20.el8.x86_64.rpm                                                        417 kB/s |  81 kB     00:00    
(245/686): libtheora-1.1.1-21.el8.x86_64.rpm                                                      858 kB/s | 184 kB     00:00    
(246/686): pinentry-gtk-1.1.0-2.el8.x86_64.rpm                                                    633 kB/s |  54 kB     00:00    
(247/686): libXtst-1.2.3-7.el8.x86_64.rpm                                                         239 kB/s |  22 kB     00:00    
(248/686): lua-expat-1.3.0-12.el8.1.x86_64.rpm                                                    177 kB/s |  38 kB     00:00    
(249/686): xorg-x11-server-utils-7.7-27.el8.x86_64.rpm                                            968 kB/s | 197 kB     00:00    
(250/686): flac-libs-1.3.2-9.el8.x86_64.rpm                                                       896 kB/s | 217 kB     00:00    
(251/686): libXinerama-1.1.4-1.el8.x86_64.rpm                                                     216 kB/s |  16 kB     00:00    
(252/686): genisoimage-1.1.11-39.el8.x86_64.rpm                                                   1.5 MB/s | 316 kB     00:00    
(253/686): totem-pl-parser-3.26.1-2.el8.x86_64.rpm                                                118 kB/s | 194 kB     00:01    
(254/686): perl-NetAddr-IP-4.079-7.el8.x86_64.rpm                                                 511 kB/s | 132 kB     00:00    
(255/686): libdvdnav-5.0.3-8.el8.x86_64.rpm                                                       561 kB/s |  61 kB     00:00    
(256/686): celt051-0.5.1.3-15.el8.x86_64.rpm                                                      415 kB/s |  63 kB     00:00    
(257/686): startup-notification-0.12-15.el8.x86_64.rpm                                             71 kB/s |  45 kB     00:00    
(258/686): liboauth-1.0.3-9.el8.x86_64.rpm                                                        287 kB/s |  29 kB     00:00    
(259/686): libiec61883-1.2.0-18.el8.x86_64.rpm                                                    254 kB/s |  43 kB     00:00    
(260/686): at-spi2-core-2.28.0-1.el8.x86_64.rpm                                                   482 kB/s | 169 kB     00:00    
(261/686): libev-4.24-6.el8.x86_64.rpm                                                            277 kB/s |  52 kB     00:00    
(262/686): gnome-keyring-pam-3.28.2-1.el8.x86_64.rpm                                              250 kB/s |  47 kB     00:00    
(263/686): libsrtp-1.5.4-8.el8.x86_64.rpm                                                         295 kB/s | 282 kB     00:00    
(264/686): graphite2-1.3.10-10.el8.x86_64.rpm                                                     642 kB/s | 122 kB     00:00    
(265/686): libXcursor-1.1.15-3.el8.x86_64.rpm                                                     381 kB/s |  36 kB     00:00    
(266/686): perl-Socket6-0.28-6.el8.x86_64.rpm                                                      35 kB/s |  36 kB     00:01    
(267/686): libogg-1.3.2-10.el8.x86_64.rpm                                                         162 kB/s |  31 kB     00:00    
(268/686): at-spi2-atk-2.26.2-1.el8.x86_64.rpm                                                    471 kB/s |  89 kB     00:00    
(269/686): switcheroo-control-1.1-5.el8.x86_64.rpm                                                 65 kB/s |  30 kB     00:00    
(270/686): speexdsp-1.2-0.13.rc3.el8.x86_64.rpm                                                   577 kB/s | 456 kB     00:00    
(271/686): rtkit-0.11-19.el8.x86_64.rpm                                                           303 kB/s |  61 kB     00:00    
(272/686): mcpp-2.7.2-20.el8.x86_64.rpm                                                           162 kB/s |  31 kB     00:00    
(273/686): taglib-1.11.1-8.el8.x86_64.rpm                                                         845 kB/s | 340 kB     00:00    
(274/686): librbd1-12.2.7-9.el8.x86_64.rpm                                                        2.6 MB/s | 1.1 MB     00:00    
(275/686): libXfont2-2.0.3-2.el8.x86_64.rpm                                                       335 kB/s | 149 kB     00:00    
(276/686): colord-gtk-0.1.26-8.el8.x86_64.rpm                                                     316 kB/s |  34 kB     00:00    
(277/686): cogl-1.22.2-10.el8.x86_64.rpm                                                          2.5 MB/s | 478 kB     00:00    
(278/686): libimobiledevice-1.2.0-16.el8.x86_64.rpm                                               147 kB/s |  80 kB     00:00    
(279/686): libSM-1.2.3-1.el8.x86_64.rpm                                                           250 kB/s |  48 kB     00:00    
(280/686): libxklavier-5.4-11.el8.x86_64.rpm                                                      145 kB/s |  71 kB     00:00    
(281/686): libidn-1.34-5.el8.x86_64.rpm                                                           1.0 MB/s | 239 kB     00:00    
(282/686): libgnomekbd-3.26.0-4.el8.x86_64.rpm                                                    789 kB/s | 168 kB     00:00    
(283/686): adwaita-gtk2-theme-3.22.3-4.el8.x86_64.rpm                                             618 kB/s | 132 kB     00:00    
(284/686): hyphen-2.8.8-9.el8.x86_64.rpm                                                          158 kB/s |  33 kB     00:00    
(285/686): librados2-12.2.7-9.el8.x86_64.rpm                                                      5.6 MB/s | 2.9 MB     00:00    
(286/686): libXfixes-5.0.3-7.el8.x86_64.rpm                                                       203 kB/s |  25 kB     00:00    
(287/686): lua-lpeg-1.0.1-6.el8.x86_64.rpm                                                        665 kB/s |  67 kB     00:00    
(288/686): libgtop2-2.38.0-3.el8.x86_64.rpm                                                       229 kB/s | 142 kB     00:00    
(289/686): linuxconsoletools-1.6.0-4.el8.x86_64.rpm                                               389 kB/s |  82 kB     00:00    
(290/686): libshout-2.2.2-19.el8.x86_64.rpm                                                       571 kB/s |  50 kB     00:00    
(291/686): xorg-x11-drv-vesa-2.4.0-3.el8.x86_64.rpm                                                73 kB/s |  31 kB     00:00    
(292/686): libXxf86vm-1.1.4-9.el8.x86_64.rpm                                                      139 kB/s |  19 kB     00:00    
(293/686): libdv-1.0.0-27.el8.x86_64.rpm                                                          750 kB/s |  85 kB     00:00    
(294/686): xcb-util-0.4.0-10.el8.x86_64.rpm                                                       176 kB/s |  22 kB     00:00    
(295/686): perl-Text-Soundex-3.05-8.el8.x86_64.rpm                                                276 kB/s |  32 kB     00:00    
(296/686): xorg-x11-drv-fbdev-0.5.0-2.el8.x86_64.rpm                                              212 kB/s |  27 kB     00:00    
(297/686): speex-1.2.0-1.el8.x86_64.rpm                                                           411 kB/s |  71 kB     00:00    
(298/686): xorg-x11-xinit-1.3.4-18.el8.x86_64.rpm                                                 241 kB/s |  58 kB     00:00    
(299/686): libthai-0.1.27-2.el8.x86_64.rpm                                                        654 kB/s | 203 kB     00:00    
(300/686): opus-1.3-0.4.beta.el8.x86_64.rpm                                                       924 kB/s | 204 kB     00:00    
(301/686): colord-libs-1.4.2-1.el8.x86_64.rpm                                                     2.1 MB/s | 236 kB     00:00    
(302/686): libijs-0.35-5.el8.x86_64.rpm                                                           314 kB/s |  30 kB     00:00    
(303/686): libXdamage-1.1.4-14.el8.x86_64.rpm                                                     141 kB/s |  27 kB     00:00    
(304/686): clutter-gtk-1.8.4-3.el8.x86_64.rpm                                                     163 kB/s |  53 kB     00:00    
(305/686): rest-0.8.1-2.el8.x86_64.rpm                                                            332 kB/s |  71 kB     00:00    
(306/686): libdvdread-5.0.3-9.el8.x86_64.rpm                                                      847 kB/s |  75 kB     00:00    
(307/686): sbc-1.3-9.el8.x86_64.rpm                                                               247 kB/s |  65 kB     00:00    
(308/686): GConf2-3.2.6-22.el8.x86_64.rpm                                                         3.5 MB/s | 1.0 MB     00:00    
(309/686): harfbuzz-1.7.5-3.el8.x86_64.rpm                                                        1.4 MB/s | 294 kB     00:00    
(310/686): clutter-gst3-3.0.26-1.el8.x86_64.rpm                                                   419 kB/s |  82 kB     00:00    
(311/686): libpaper-1.1.24-22.el8.x86_64.rpm                                                      470 kB/s |  45 kB     00:00    
(312/686): libXcomposite-0.4.4-14.el8.x86_64.rpm                                                  217 kB/s |  29 kB     00:00    
(313/686): perl-XML-Parser-2.44-11.el8.x86_64.rpm                                                 1.2 MB/s | 226 kB     00:00    
(314/686): libfontenc-1.1.3-8.el8.x86_64.rpm                                                      154 kB/s |  37 kB     00:00    
(315/686): libusbmuxd-1.0.10-9.el8.x86_64.rpm                                                     365 kB/s |  35 kB     00:00    
(316/686): libasyncns-0.8-14.el8.x86_64.rpm                                                        47 kB/s |  32 kB     00:00    
(317/686): lua-socket-3.0-0.17.rc1.el8.x86_64.rpm                                                 115 kB/s | 184 kB     00:01    
(318/686): gnome-themes-standard-3.22.3-4.el8.x86_64.rpm                                          3.5 MB/s | 2.7 MB     00:00    
(319/686): libXrender-0.9.10-7.el8.x86_64.rpm                                                      83 kB/s |  33 kB     00:00    
(320/686): lame-libs-3.100-6.el8.x86_64.rpm                                                       1.6 MB/s | 361 kB     00:00    
(321/686): mpg123-libs-1.25.10-2.el8.x86_64.rpm                                                   975 kB/s | 208 kB     00:00    
(322/686): hunspell-1.6.2-1.el8.x86_64.rpm                                                        1.7 MB/s | 331 kB     00:00    
(323/686): atk-2.28.1-1.el8.x86_64.rpm                                                            1.2 MB/s | 272 kB     00:00    
(324/686): libdatrie-0.2.9-7.el8.x86_64.rpm                                                       137 kB/s |  33 kB     00:00    
(325/686): libraw1394-2.1.2-5.el8.x86_64.rpm                                                      380 kB/s |  72 kB     00:00    
(326/686): gtksourceview3-3.24.9-1.el8.x86_64.rpm                                                 2.4 MB/s | 605 kB     00:00    
(327/686): harfbuzz-icu-1.7.5-3.el8.x86_64.rpm                                                    126 kB/s |  24 kB     00:00    
(328/686): libxshmfence-1.3-2.el8.x86_64.rpm                                                       31 kB/s |  13 kB     00:00    
(329/686): isl-0.16.1-6.el8.x86_64.rpm                                                            3.0 MB/s | 841 kB     00:00    
(330/686): gsm-1.0.17-5.el8.x86_64.rpm                                                            145 kB/s |  37 kB     00:00    
(331/686): libquvi-0.9.4-12.el8.x86_64.rpm                                                        467 kB/s |  92 kB     00:00    
(332/686): bison-3.0.4-10.el8.x86_64.rpm                                                          3.2 MB/s | 688 kB     00:00    
(333/686): cups-pk-helper-0.2.6-5.el8.x86_64.rpm                                                  405 kB/s |  91 kB     00:00    
(334/686): colord-1.4.2-1.el8.x86_64.rpm                                                          1.0 MB/s | 494 kB     00:00    
(335/686): iio-sensor-proxy-2.4-3.el8.x86_64.rpm                                                  244 kB/s |  54 kB     00:00    
(336/686): xorg-x11-xauth-1.0.9-12.el8.x86_64.rpm                                                  35 kB/s |  39 kB     00:01    
(337/686): libXv-1.0.11-7.el8.x86_64.rpm                                                           25 kB/s |  20 kB     00:00    
(338/686): mtdev-1.1.5-12.el8.x86_64.rpm                                                           39 kB/s |  24 kB     00:00    
(339/686): python3-cairo-1.16.3-6.el8.x86_64.rpm                                                  421 kB/s |  90 kB     00:00    
(340/686): python3-cups-1.9.72-21.el8.x86_64.rpm                                                  451 kB/s |  86 kB     00:00    
(341/686): gcr-3.28.0-1.el8.x86_64.rpm                                                            682 kB/s | 692 kB     00:01    
(342/686): libplist-2.0.0-10.el8.x86_64.rpm                                                       352 kB/s |  77 kB     00:00    
(343/686): libv4l-1.14.2-3.el8.x86_64.rpm                                                         741 kB/s | 195 kB     00:00    
(344/686): libXt-1.1.5-12.el8.x86_64.rpm                                                          1.8 MB/s | 185 kB     00:00    
(345/686): flex-2.6.1-9.el8.x86_64.rpm                                                            2.1 MB/s | 320 kB     00:00    
(346/686): libvorbis-1.3.6-2.el8.x86_64.rpm                                                       752 kB/s | 196 kB     00:00    
(347/686): libssh2-1.8.0-8.module+el8.0.0+4084+cceb9f44.1.x86_64.rpm                              292 kB/s |  99 kB     00:00    
(348/686): gnome-keyring-3.28.2-1.el8.x86_64.rpm                                                  970 kB/s | 931 kB     00:00    
(349/686): perl-String-ShellQuote-1.04-24.module+el8.1.0+2942+5e3df93c.noarch.rpm                  77 kB/s |  23 kB     00:00    
(350/686): gdk-pixbuf2-modules-2.36.12-5.el8.x86_64.rpm                                           332 kB/s | 109 kB     00:00    
(351/686): libICE-1.0.9-15.el8.x86_64.rpm                                                         606 kB/s |  74 kB     00:00    
(352/686): perl-Convert-ASN1-0.27-17.el8.noarch.rpm                                               624 kB/s |  60 kB     00:00    
(353/686): python3-pycurl-7.43.0.2-4.el8.x86_64.rpm                                               1.2 MB/s | 227 kB     00:00    
(354/686): libcacard-2.7.0-2.el8_1.x86_64.rpm                                                      66 kB/s |  52 kB     00:00    
(355/686): gstreamer1-plugins-bad-free-1.16.1-1.el8.x86_64.rpm                                    3.5 MB/s | 1.8 MB     00:00    
(356/686): libpmem-1.6.1-1.el8.x86_64.rpm                                                         373 kB/s |  79 kB     00:00    
(357/686): libxcb-1.13.1-1.el8.x86_64.rpm                                                         1.2 MB/s | 229 kB     00:00    
(358/686): orc-0.4.28-3.el8.x86_64.rpm                                                            928 kB/s | 175 kB     00:00    
(359/686): gstreamer1-1.16.1-2.el8.x86_64.rpm                                                     2.3 MB/s | 1.3 MB     00:00    
(360/686): perl-LDAP-0.66-7.el8.noarch.rpm                                                        568 kB/s | 386 kB     00:00    
(361/686): libxkbcommon-x11-0.9.1-1.el8.x86_64.rpm                                                 87 kB/s |  25 kB     00:00    
(362/686): gvnc-0.9.0-2.el8.x86_64.rpm                                                            1.0 MB/s | 102 kB     00:00    
(363/686): xorg-x11-drv-libinput-0.29.0-1.el8.x86_64.rpm                                          287 kB/s |  50 kB     00:00    
(364/686): perl-HTML-Parser-3.72-15.module+el8.3.0+6498+9eecfe51.x86_64.rpm                       630 kB/s | 119 kB     00:00    
(365/686): gtk-vnc2-0.9.0-2.el8.x86_64.rpm                                                         91 kB/s |  49 kB     00:00    
(366/686): perl-LWP-MediaTypes-6.02-15.module+el8.3.0+6498+9eecfe51.noarch.rpm                    301 kB/s |  29 kB     00:00    
(367/686): perl-TimeDate-2.30-15.module+el8.3.0+6498+9eecfe51.noarch.rpm                          264 kB/s |  53 kB     00:00    
(368/686): python3-gobject-3.28.3-2.el8.x86_64.rpm                                                261 kB/s |  26 kB     00:00    
(369/686): perl-Net-HTTP-6.17-2.module+el8.3.0+6498+9eecfe51.noarch.rpm                           230 kB/s |  43 kB     00:00    
(370/686): perl-Data-Dump-1.23-7.module+el8.3.0+6498+9eecfe51.noarch.rpm                           76 kB/s |  37 kB     00:00    
(371/686): perl-HTTP-Date-6.02-19.module+el8.3.0+6498+9eecfe51.noarch.rpm                         102 kB/s |  19 kB     00:00    
(372/686): perl-WWW-RobotRules-6.02-18.module+el8.3.0+6498+9eecfe51.noarch.rpm                    113 kB/s |  23 kB     00:00    
(373/686): perl-HTTP-Message-6.18-1.module+el8.3.0+6498+9eecfe51.noarch.rpm                       1.2 MB/s | 100 kB     00:00    
(374/686): clutter-1.26.2-8.el8.x86_64.rpm                                                        967 kB/s | 1.1 MB     00:01    
(375/686): perl-IO-HTML-1.001-11.module+el8.3.0+6498+9eecfe51.noarch.rpm                          256 kB/s |  28 kB     00:00    
(376/686): perl-NTLM-1.09-17.module+el8.3.0+6498+9eecfe51.noarch.rpm                              256 kB/s |  24 kB     00:00    
(377/686): perl-libwww-perl-6.34-1.module+el8.3.0+6498+9eecfe51.noarch.rpm                        1.9 MB/s | 213 kB     00:00    
(378/686): perl-Digest-HMAC-1.03-17.module+el8.3.0+6498+9eecfe51.noarch.rpm                       181 kB/s |  20 kB     00:00    
(379/686): perl-HTML-Tagset-3.20-34.module+el8.3.0+6498+9eecfe51.noarch.rpm                       235 kB/s |  24 kB     00:00    
(380/686): perl-HTTP-Cookies-6.04-2.module+el8.3.0+6498+9eecfe51.noarch.rpm                       146 kB/s |  39 kB     00:00    
(381/686): perl-File-Listing-6.04-17.module+el8.3.0+6498+9eecfe51.noarch.rpm                      146 kB/s |  18 kB     00:00    
(382/686): perl-Try-Tiny-0.30-7.module+el8.3.0+6498+9eecfe51.noarch.rpm                           471 kB/s |  45 kB     00:00    
(383/686): vte291-0.52.4-2.el8.x86_64.rpm                                                         2.4 MB/s | 256 kB     00:00    
(384/686): autogen-libopts-5.18.12-8.el8.x86_64.rpm                                               876 kB/s |  75 kB     00:00    
(385/686): perl-HTTP-Negotiate-6.01-19.module+el8.3.0+6498+9eecfe51.noarch.rpm                     74 kB/s |  22 kB     00:00    
(386/686): pipewire-0.3.6-1.el8.x86_64.rpm                                                        571 kB/s | 108 kB     00:00    
(387/686): libXext-1.3.4-1.el8.x86_64.rpm                                                         166 kB/s |  45 kB     00:00    
(388/686): libmaxminddb-1.2.0-10.el8.x86_64.rpm                                                   177 kB/s |  33 kB     00:00    
(389/686): perl-DBD-Pg-3.7.4-4.module+el8.3.0+6565+907cf59b.x86_64.rpm                            330 kB/s | 215 kB     00:00    
(390/686): libXi-1.7.10-1.el8.x86_64.rpm                                                          198 kB/s |  49 kB     00:00    
(391/686): libXdmcp-1.1.3-1.el8.x86_64.rpm                                                        216 kB/s |  41 kB     00:00    
(392/686): librsvg2-2.42.7-4.el8.x86_64.rpm                                                       2.2 MB/s | 555 kB     00:00    
(393/686): libXrandr-1.5.2-1.el8.x86_64.rpm                                                       169 kB/s |  34 kB     00:00    
(394/686): bpg-dejavu-sans-fonts-2.28-11.el8.noarch.rpm                                            60 kB/s |  38 kB     00:00    
(395/686): libXft-2.3.3-1.el8.x86_64.rpm                                                          345 kB/s |  67 kB     00:00    
(396/686): xorg-x11-xkb-utils-7.7-28.el8.x86_64.rpm                                               1.2 MB/s | 114 kB     00:00    
(397/686): bpg-fonts-common-20120413-11.el8.noarch.rpm                                             36 kB/s |  23 kB     00:00    
(398/686): libvpx-1.7.0-8.el8.x86_64.rpm                                                          4.3 MB/s | 854 kB     00:00    
(399/686): libXau-1.0.9-3.el8.x86_64.rpm                                                          416 kB/s |  37 kB     00:00    
(400/686): glx-utils-8.4.0-5.20181118git1830dcb.el8.x86_64.rpm                                    486 kB/s |  44 kB     00:00    
(401/686): libxkbfile-1.1.0-1.el8.x86_64.rpm                                                      828 kB/s |  88 kB     00:00    
(402/686): pipewire-libs-0.3.6-1.el8.x86_64.rpm                                                   4.2 MB/s | 712 kB     00:00    
(403/686): drpm-0.4.1-3.el8.x86_64.rpm                                                            501 kB/s |  68 kB     00:00    
(404/686): libXmu-1.1.3-1.el8.x86_64.rpm                                                          399 kB/s |  75 kB     00:00    
(405/686): perl-Mail-Sender-0.903-7.el8.noarch.rpm                                                 68 kB/s |  57 kB     00:00    
(406/686): libvirt-glib-3.0.0-1.el8.x86_64.rpm                                                    343 kB/s | 104 kB     00:00    
(407/686): vte-profile-0.52.4-2.el8.x86_64.rpm                                                     55 kB/s |  15 kB     00:00    
(408/686): nodejs-full-i18n-10.24.0-1.module+el8.3.0+10166+b07ac28e.x86_64.rpm                    7.0 MB/s | 7.3 MB     00:01    
(409/686): nodejs-10.24.0-1.module+el8.3.0+10166+b07ac28e.x86_64.rpm                              8.3 MB/s | 8.8 MB     00:01    
(410/686): abattis-cantarell-fonts-0.0.25-6.el8.noarch.rpm                                        693 kB/s | 156 kB     00:00    
(411/686): npm-6.14.11-1.10.24.0.1.module+el8.3.0+10166+b07ac28e.x86_64.rpm                       3.5 MB/s | 3.7 MB     00:01    
(412/686): gpm-1.20.7-17.el8.x86_64.rpm                                                           878 kB/s | 200 kB     00:00    
(413/686): osinfo-db-tools-1.9.0-1.el8.x86_64.rpm                                                 312 kB/s |  68 kB     00:00    
(414/686): gnome-bluetooth-3.34.3-1.el8.x86_64.rpm                                                256 kB/s |  60 kB     00:00    
(415/686): libcanberra-gtk3-0.30-18.el8.x86_64.rpm                                                101 kB/s |  39 kB     00:00    
(416/686): gjs-1.56.2-5.el8.x86_64.rpm                                                            2.2 MB/s | 425 kB     00:00    
(417/686): gnome-terminal-3.28.3-3.el8.x86_64.rpm                                                 3.4 MB/s | 1.3 MB     00:00    
(418/686): libcanberra-0.30-18.el8.x86_64.rpm                                                     214 kB/s |  93 kB     00:00    
(419/686): twolame-libs-0.3.13-12.el8.x86_64.rpm                                                  583 kB/s |  57 kB     00:00    
(420/686): libmpc-1.1.0-9.1.el8.x86_64.rpm                                                        674 kB/s |  61 kB     00:00    
(421/686): enchant2-2.2.3-3.el8.x86_64.rpm                                                        441 kB/s |  62 kB     00:00    
(422/686): gnome-bluetooth-libs-3.34.3-1.el8.x86_64.rpm                                           1.3 MB/s | 326 kB     00:00    
(423/686): geoclue2-2.5.5-2.el8.x86_64.rpm                                                        663 kB/s | 132 kB     00:00    
(424/686): spice-gtk3-0.38-6.el8.x86_64.rpm                                                       317 kB/s |  76 kB     00:00    
(425/686): soundtouch-2.0.0-3.el8.x86_64.rpm                                                      858 kB/s |  76 kB     00:00    
(426/686): dconf-0.28.0-4.el8.x86_64.rpm                                                          1.0 MB/s | 108 kB     00:00    
(427/686): SDL-1.2.15-39.el8.x86_64.rpm                                                           1.4 MB/s | 218 kB     00:00    
(428/686): spice-glib-0.38-6.el8.x86_64.rpm                                                       3.0 MB/s | 385 kB     00:00    
(429/686): woff2-1.0.2-5.el8.x86_64.rpm                                                           530 kB/s |  59 kB     00:00    
(430/686): libvisual-0.4.0-25.el8.x86_64.rpm                                                      588 kB/s | 145 kB     00:00    
(431/686): geocode-glib-3.26.0-3.el8.x86_64.rpm                                                   217 kB/s |  72 kB     00:00    
(432/686): spice-server-0.14.3-4.el8.x86_64.rpm                                                   1.6 MB/s | 409 kB     00:00    
(433/686): gstreamer1-plugins-base-1.16.1-2.el8.x86_64.rpm                                        6.6 MB/s | 2.0 MB     00:00    
(434/686): uuid-1.6.2-43.el8.x86_64.rpm                                                           233 kB/s |  64 kB     00:00    
(435/686): telnet-0.17-76.el8.x86_64.rpm                                                          374 kB/s |  72 kB     00:00    
(436/686): geoclue2-libs-2.5.5-2.el8.x86_64.rpm                                                   269 kB/s |  52 kB     00:00    
(437/686): jbig2dec-libs-0.16-1.el8.x86_64.rpm                                                    380 kB/s |  72 kB     00:00    
(438/686): protobuf-c-1.3.0-6.el8.x86_64.rpm                                                      159 kB/s |  37 kB     00:00    
(439/686): gtk2-2.24.32-5.el8.x86_64.rpm                                                          4.8 MB/s | 3.4 MB     00:00    
(440/686): python36-3.6.8-38.module+el8.5.0+12207+5c5719bc.x86_64.rpm                             188 kB/s |  19 kB     00:00    
(441/686): libjpeg-turbo-1.5.3-12.el8.x86_64.rpm                                                  1.3 MB/s | 157 kB     00:00    
(442/686): ipmitool-1.8.18-18.el8.x86_64.rpm                                                      1.6 MB/s | 395 kB     00:00    
(443/686): lua-5.3.4-12.el8.x86_64.rpm                                                            733 kB/s | 192 kB     00:00    
(444/686): xorg-x11-font-utils-7.5-41.el8.x86_64.rpm                                              825 kB/s | 104 kB     00:00    
(445/686): libevdev-1.10.0-1.el8.x86_64.rpm                                                        96 kB/s |  44 kB     00:00    
(446/686): libX11-xcb-1.6.8-5.el8.x86_64.rpm                                                       43 kB/s |  14 kB     00:00    
(447/686): libgweather-3.28.2-4.el8.x86_64.rpm                                                    6.1 MB/s | 3.1 MB     00:00    
(448/686): glusterfs-cli-6.0-56.4.el8.x86_64.rpm                                                  658 kB/s | 194 kB     00:00    
(449/686): grilo-0.3.6-3.el8.x86_64.rpm                                                           450 kB/s | 220 kB     00:00    
(450/686): vino-3.22.0-11.el8.x86_64.rpm                                                          1.7 MB/s | 461 kB     00:00    
(451/686): libepoxy-1.5.8-1.el8.x86_64.rpm                                                        1.1 MB/s | 225 kB     00:00    
(452/686): perl-GSSAPI-0.28-25.el8.x86_64.rpm                                                     164 kB/s |  64 kB     00:00    
(453/686): pango-1.42.4-8.el8.x86_64.rpm                                                          1.3 MB/s | 297 kB     00:00    
(454/686): glusterfs-api-6.0-56.4.el8.x86_64.rpm                                                  305 kB/s |  99 kB     00:00    
(455/686): libX11-1.6.8-5.el8.x86_64.rpm                                                          3.4 MB/s | 611 kB     00:00    
(456/686): libwacom-data-1.6-3.el8.noarch.rpm                                                     183 kB/s | 104 kB     00:00    
(457/686): ibus-gtk2-1.5.19-14.el8_5.x86_64.rpm                                                   333 kB/s |  62 kB     00:00    
(458/686): libwacom-1.6-3.el8.x86_64.rpm                                                           61 kB/s |  42 kB     00:00    
(459/686): ibus-setup-1.5.19-14.el8_5.noarch.rpm                                                  356 kB/s |  97 kB     00:00    
(460/686): ibus-libs-1.5.19-14.el8_5.x86_64.rpm                                                   1.3 MB/s | 265 kB     00:00    
(461/686): jasper-libs-2.0.14-5.el8.x86_64.rpm                                                    519 kB/s | 167 kB     00:00    
(462/686): ibus-gtk3-1.5.19-14.el8_5.x86_64.rpm                                                    81 kB/s |  63 kB     00:00    
(463/686): libX11-common-1.6.8-5.el8.noarch.rpm                                                   658 kB/s | 158 kB     00:00    
(464/686): perl-DBI-1.641-4.module+el8.6.0+13388+70c0920f.x86_64.rpm                              2.4 MB/s | 741 kB     00:00    
(465/686): mdevctl-1.1.0-2.el8.x86_64.rpm                                                         2.5 MB/s | 755 kB     00:00    
(466/686): accountsservice-0.6.55-4.el8.x86_64.rpm                                                737 kB/s | 139 kB     00:00    
(467/686): adwaita-cursor-theme-3.28.0-3.el8.noarch.rpm                                           2.4 MB/s | 647 kB     00:00    
(468/686): pixman-0.38.4-2.el8.x86_64.rpm                                                         672 kB/s | 257 kB     00:00    
(469/686): cairo-gobject-1.15.12-6.el8.x86_64.rpm                                                 178 kB/s |  33 kB     00:00    
(470/686): tcpdump-4.9.3-3.el8.x86_64.rpm                                                         2.4 MB/s | 453 kB     00:00    
(471/686): ibus-1.5.19-14.el8_5.x86_64.rpm                                                        4.1 MB/s | 9.1 MB     00:02    
(472/686): aspell-0.60.6.1-22.el8.x86_64.rpm                                                      3.2 MB/s | 673 kB     00:00    
(473/686): cairo-1.15.12-6.el8.x86_64.rpm                                                         3.3 MB/s | 719 kB     00:00    
(474/686): virt-manager-common-3.2.0-4.el8.noarch.rpm                                             3.7 MB/s | 1.0 MB     00:00    
(475/686): redhat-backgrounds-84.5-1.el8.noarch.rpm                                                10 MB/s |  42 MB     00:04    
(476/686): adwaita-icon-theme-3.28.0-3.el8.noarch.rpm                                             8.7 MB/s |  11 MB     00:01    
(477/686): netpbm-progs-10.82.00-7.el8.x86_64.rpm                                                 2.8 MB/s | 2.2 MB     00:00    
(478/686): mozilla-filesystem-1.9-19.el8.x86_64.rpm                                               109 kB/s |  11 kB     00:00    
(479/686): libglvnd-glx-1.3.4-1.el8.x86_64.rpm                                                    721 kB/s | 137 kB     00:00    
(480/686): libpq-13.5-1.el8.x86_64.rpm                                                            952 kB/s | 198 kB     00:00    
(481/686): libglvnd-egl-1.3.4-1.el8.x86_64.rpm                                                    542 kB/s |  49 kB     00:00    
(482/686): libnotify-0.7.7-6.el8.x86_64.rpm                                                       467 kB/s |  47 kB     00:00    
(483/686): netpbm-10.82.00-7.el8.x86_64.rpm                                                       169 kB/s | 206 kB     00:01    
(484/686): accountsservice-libs-0.6.55-4.el8.x86_64.rpm                                           1.1 MB/s |  96 kB     00:00    
(485/686): python3-pip-9.0.3-22.el8.noarch.rpm                                                    200 kB/s |  20 kB     00:00    
(486/686): libglvnd-1.3.4-1.el8.x86_64.rpm                                                        1.0 MB/s | 128 kB     00:00    
(487/686): webrtc-audio-processing-0.3-10.el8.x86_64.rpm                                          2.6 MB/s | 297 kB     00:00    
(488/686): libosinfo-1.9.0-3.el8.x86_64.rpm                                                       1.1 MB/s | 301 kB     00:00    
(489/686): libglvnd-gles-1.3.4-1.el8.x86_64.rpm                                                   158 kB/s |  40 kB     00:00    
(490/686): python3-suds-0.7-0.11.94664ddd46a6.el8.noarch.rpm                                      1.2 MB/s | 242 kB     00:00    
(491/686): libglvnd-opengl-1.3.4-1.el8.x86_64.rpm                                                 478 kB/s |  47 kB     00:00    
(492/686): libinput-1.16.3-3.el8_6.x86_64.rpm                                                     1.6 MB/s | 217 kB     00:00    
(493/686): cheese-libs-3.28.0-4.el8_6.x86_64.rpm                                                  4.7 MB/s | 826 kB     00:00    
(494/686): fribidi-1.0.4-9.el8.x86_64.rpm                                                         1.0 MB/s |  89 kB     00:00    
(495/686): openjpeg2-2.4.0-5.el8.x86_64.rpm                                                       1.0 MB/s | 165 kB     00:00    
(496/686): createrepo_c-0.17.7-6.el8.x86_64.rpm                                                   830 kB/s |  89 kB     00:00    
(497/686): yajl-2.1.0-11.el8.x86_64.rpm                                                           422 kB/s |  41 kB     00:00    
(498/686): wavpack-5.1.0-16.el8.x86_64.rpm                                                        911 kB/s | 191 kB     00:00    
(499/686): virt-manager-3.2.0-4.el8.noarch.rpm                                                    807 kB/s | 621 kB     00:00    
(500/686): tftp-server-5.2-26.el8.x86_64.rpm                                                      138 kB/s |  51 kB     00:00    
(501/686): sbd-1.5.1-2.el8.x86_64.rpm                                                              86 kB/s |  80 kB     00:00    
(502/686): boost-thread-1.66.0-13.el8.x86_64.rpm                                                  629 kB/s |  59 kB     00:00    
(503/686): libwsman1-2.6.5-9.el8.x86_64.rpm                                                       214 kB/s | 142 kB     00:00    
(504/686): boost-date-time-1.66.0-13.el8.x86_64.rpm                                               190 kB/s |  30 kB     00:00    
(505/686): createrepo_c-libs-0.17.7-6.el8.x86_64.rpm                                              932 kB/s | 116 kB     00:00    
(506/686): evolution-data-server-langpacks-3.28.5-20.el8.noarch.rpm                               7.7 MB/s | 1.4 MB     00:00    
(507/686): boost-chrono-1.66.0-13.el8.x86_64.rpm                                                  226 kB/s |  23 kB     00:00    
(508/686): osinfo-db-20220727-2.el8.noarch.rpm                                                    1.6 MB/s | 267 kB     00:00    
(509/686): libnma-1.8.38-1.el8.x86_64.rpm                                                         2.7 MB/s | 291 kB     00:00    
(510/686): fstrm-0.6.1-3.el8.x86_64.rpm                                                           257 kB/s |  29 kB     00:00    
(511/686): gtk-update-icon-cache-3.22.30-11.el8.x86_64.rpm                                        427 kB/s |  33 kB     00:00    
(512/686): libverto-libev-0.3.2-2.el8.x86_64.rpm                                                   81 kB/s |  16 kB     00:00    
(513/686): ipxe-roms-qemu-20181214-11.git133f4c47.el8.noarch.rpm                                  3.3 MB/s | 1.2 MB     00:00    
(514/686): boost-program-options-1.66.0-13.el8.x86_64.rpm                                         1.6 MB/s | 141 kB     00:00    
(515/686): flatpak-1.10.7-1.el8.x86_64.rpm                                                        4.7 MB/s | 1.7 MB     00:00    
(516/686): pulseaudio-libs-glib2-14.0-4.el8.x86_64.rpm                                            257 kB/s |  31 kB     00:00    
(517/686): flatpak-selinux-1.10.7-1.el8.noarch.rpm                                                310 kB/s |  27 kB     00:00    
(518/686): pulseaudio-14.0-4.el8.x86_64.rpm                                                       5.3 MB/s | 1.0 MB     00:00    
(519/686): xdg-desktop-portal-gtk-1.8.0-1.el8.x86_64.rpm                                          1.3 MB/s | 223 kB     00:00    
(520/686): pulseaudio-libs-14.0-4.el8.x86_64.rpm                                                  3.8 MB/s | 682 kB     00:00    
(521/686): flatpak-session-helper-1.10.7-1.el8.x86_64.rpm                                         397 kB/s |  78 kB     00:00    
(522/686): nm-connection-editor-1.26.0-1.el8.x86_64.rpm                                           4.4 MB/s | 851 kB     00:00    
(523/686): evolution-data-server-3.28.5-20.el8.x86_64.rpm                                         5.4 MB/s | 2.1 MB     00:00    
(524/686): boost-system-1.66.0-13.el8.x86_64.rpm                                                  193 kB/s |  18 kB     00:00    
(525/686): libgdata-0.17.9-4.el8.x86_64.rpm                                                       2.3 MB/s | 454 kB     00:00    
(526/686): openwsman-python3-2.6.5-9.el8.x86_64.rpm                                               205 kB/s | 122 kB     00:00    
(527/686): nmap-ncat-7.70-8.el8.x86_64.rpm                                                        654 kB/s | 237 kB     00:00    
(528/686): gstreamer1-plugins-good-1.16.1-3.el8.x86_64.rpm                                        4.6 MB/s | 2.3 MB     00:00    
(529/686): nmap-7.70-8.el8.x86_64.rpm                                                             7.2 MB/s | 5.8 MB     00:00    
(530/686): boost-iostreams-1.66.0-13.el8.x86_64.rpm                                               501 kB/s |  42 kB     00:00    
(531/686): boost-regex-1.66.0-13.el8.x86_64.rpm                                                   603 kB/s | 281 kB     00:00    
(532/686): boost-atomic-1.66.0-13.el8.x86_64.rpm                                                   75 kB/s |  14 kB     00:00    
(533/686): zenity-3.28.1-2.el8.x86_64.rpm                                                         6.3 MB/s | 4.0 MB     00:00    
(534/686): xdg-desktop-portal-1.8.1-1.el8.x86_64.rpm                                              2.0 MB/s | 418 kB     00:00    
(535/686): gtk3-3.22.30-11.el8.x86_64.rpm                                                         7.4 MB/s | 4.5 MB     00:00    
(536/686): pulseaudio-module-bluetooth-14.0-4.el8.x86_64.rpm                                      650 kB/s |  89 kB     00:00    
(537/686): openssh-askpass-8.0p1-17.el8_7.x86_64.rpm                                              499 kB/s |  94 kB     00:00    
(538/686): postgresql-10.23-1.module+el8.7.0+17280+3a452e1f.x86_64.rpm                            5.3 MB/s | 1.5 MB     00:00    
(539/686): boost-random-1.66.0-13.el8.x86_64.rpm                                                  191 kB/s |  22 kB     00:00    
(540/686): postgresql-contrib-10.23-1.module+el8.7.0+17280+3a452e1f.x86_64.rpm                    991 kB/s | 811 kB     00:00    
(541/686): libwebp-1.0.0-8.el8_7.x86_64.rpm                                                       2.3 MB/s | 273 kB     00:00    
(542/686): postgresql-server-10.23-1.module+el8.7.0+17280+3a452e1f.x86_64.rpm                     5.1 MB/s | 5.1 MB     00:00    
(543/686): netcf-libs-0.2.8-12.module+el8.8.0+16781+9f4724c2.x86_64.rpm                           648 kB/s |  77 kB     00:00    
(544/686): qemu-kvm-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                             1.9 MB/s | 182 kB     00:00    
(545/686): libiscsi-1.18.0-8.module+el8.8.0+16781+9f4724c2.x86_64.rpm                             994 kB/s |  89 kB     00:00    
(546/686): postgresql-plperl-10.23-1.module+el8.7.0+17280+3a452e1f.x86_64.rpm                     140 kB/s | 103 kB     00:00    
(547/686): gnutls-dane-3.6.16-6.el8_7.x86_64.rpm                                                   56 kB/s |  52 kB     00:00    
(548/686): mesa-libGL-22.3.0-2.el8.x86_64.rpm                                                     1.0 MB/s | 188 kB     00:00    
(549/686): fence-agents-rsb-4.2.1-112.el8.noarch.rpm                                               37 kB/s |  27 kB     00:00    
(550/686): qemu-kvm-block-ssh-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                   1.0 MB/s | 195 kB     00:00    
(551/686): gnutls-utils-3.6.16-6.el8_7.x86_64.rpm                                                 1.2 MB/s | 349 kB     00:00    
(552/686): fence-agents-common-4.2.1-112.el8.noarch.rpm                                            52 kB/s |  72 kB     00:01    
(553/686): swtpm-0.7.0-4.20211109gitb79fd91.module+el8.8.0+16781+9f4724c2.x86_64.rpm              180 kB/s |  43 kB     00:00    
(554/686): swtpm-tools-0.7.0-4.20211109gitb79fd91.module+el8.8.0+16781+9f4724c2.x86_64.rpm        632 kB/s | 119 kB     00:00    
(555/686): qemu-kvm-core-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                        8.3 MB/s | 3.4 MB     00:00    
(556/686): qemu-kvm-block-iscsi-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                 745 kB/s | 200 kB     00:00    
(557/686): sgabios-bin-0.20170427git-3.module+el8.8.0+16781+9f4724c2.noarch.rpm                    51 kB/s |  13 kB     00:00    
(558/686): swtpm-libs-0.7.0-4.20211109gitb79fd91.module+el8.8.0+16781+9f4724c2.x86_64.rpm         201 kB/s |  49 kB     00:00    
(559/686): seavgabios-bin-1.16.0-3.module+el8.8.0+16781+9f4724c2.noarch.rpm                       164 kB/s |  44 kB     00:00    
(560/686): qemu-kvm-hw-usbredir-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                 662 kB/s | 204 kB     00:00    
(561/686): qemu-img-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                             3.8 MB/s | 2.2 MB     00:00    
(562/686): perl-Sys-Virt-8.0.0-1.module+el8.8.0+16781+9f4724c2.x86_64.rpm                         1.0 MB/s | 325 kB     00:00    
(563/686): qemu-kvm-block-curl-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                  879 kB/s | 192 kB     00:00    
(564/686): qemu-kvm-ui-spice-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                    1.3 MB/s | 243 kB     00:00    
(565/686): upower-0.99.7-4.el8_7.x86_64.rpm                                                       696 kB/s | 171 kB     00:00    
(566/686): qemu-kvm-block-gluster-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm               898 kB/s | 194 kB     00:00    
(567/686): qemu-kvm-block-rbd-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                   1.0 MB/s | 195 kB     00:00    
(568/686): qemu-kvm-ui-opengl-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                   203 kB/s | 196 kB     00:00    
(569/686): qemu-kvm-common-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                      3.9 MB/s | 1.1 MB     00:00    
(570/686): seabios-bin-1.16.0-3.module+el8.8.0+16781+9f4724c2.noarch.rpm                          1.4 MB/s | 138 kB     00:00    
(571/686): python3-libvirt-8.0.0-2.module+el8.8.0+16781+9f4724c2.x86_64.rpm                       1.7 MB/s | 332 kB     00:00    
(572/686): qemu-kvm-docs-6.2.0-32.module+el8.8.0+18361+9f407f6e.x86_64.rpm                        3.6 MB/s | 2.6 MB     00:00    
(573/686): wget-1.19.5-11.el8.x86_64.rpm                                                          3.8 MB/s | 734 kB     00:00    
(574/686): libdrm-2.4.114-1.el8.x86_64.rpm                                                        357 kB/s | 165 kB     00:00    
(575/686): mesa-libEGL-22.3.0-2.el8.x86_64.rpm                                                    1.4 MB/s | 147 kB     00:00    
(576/686): fence-agents-bladecenter-4.2.1-112.el8.noarch.rpm                                      148 kB/s |  28 kB     00:00    
(577/686): libwayland-egl-1.21.0-1.el8.x86_64.rpm                                                  73 kB/s |  20 kB     00:00    
(578/686): mesa-libglapi-22.3.0-2.el8.x86_64.rpm                                                  354 kB/s |  67 kB     00:00    
(579/686): llvm-libs-15.0.7-1.module+el8.8.0+17939+b58878af.x86_64.rpm                             10 MB/s |  27 MB     00:02    
(580/686): fence-agents-scsi-4.2.1-112.el8.noarch.rpm                                              34 kB/s |  32 kB     00:00    
(581/686): libwayland-client-1.21.0-1.el8.x86_64.rpm                                              484 kB/s |  41 kB     00:00    
(582/686): fence-agents-ilo-ssh-4.2.1-112.el8.noarch.rpm                                           34 kB/s |  34 kB     00:00    
(583/686): fence-agents-cisco-ucs-4.2.1-112.el8.noarch.rpm                                         23 kB/s |  28 kB     00:01    
(584/686): fence-agents-redfish-4.2.1-112.el8.x86_64.rpm                                           14 kB/s |  28 kB     00:02    
(585/686): fence-agents-brocade-4.2.1-112.el8.noarch.rpm                                           22 kB/s |  28 kB     00:01    
(586/686): fence-agents-sbd-4.2.1-112.el8.noarch.rpm                                               20 kB/s |  29 kB     00:01    
(587/686): fence-agents-ipmilan-4.2.1-112.el8.noarch.rpm                                           29 kB/s |  42 kB     00:01    
(588/686): net-snmp-utils-5.8-27.el8.x86_64.rpm                                                   1.0 MB/s | 240 kB     00:00    
(589/686): fence-agents-heuristics-ping-4.2.1-112.el8.noarch.rpm                                   44 kB/s |  28 kB     00:00    
(590/686): xorg-x11-server-Xwayland-21.1.3-10.el8.x86_64.rpm                                      3.9 MB/s | 966 kB     00:00    
(591/686): dnsmasq-2.79-26.el8.x86_64.rpm                                                         1.2 MB/s | 321 kB     00:00    
(592/686): wpebackend-fdo-1.10.0-3.el8.x86_64.rpm                                                 234 kB/s |  44 kB     00:00    
(593/686): libwayland-server-1.21.0-1.el8.x86_64.rpm                                              126 kB/s |  49 kB     00:00    
(594/686): libwayland-cursor-1.21.0-1.el8.x86_64.rpm                                              138 kB/s |  26 kB     00:00    
(595/686): gnome-online-accounts-3.28.2-4.el8.x86_64.rpm                                          966 kB/s | 547 kB     00:00    
(596/686): ghostscript-9.27-6.el8.x86_64.rpm                                                      211 kB/s |  83 kB     00:00    
(597/686): gnome-settings-daemon-3.32.0-19.el8.x86_64.rpm                                         4.6 MB/s | 1.1 MB     00:00    
(598/686): mesa-filesystem-22.3.0-2.el8.x86_64.rpm                                                110 kB/s |  35 kB     00:00    
(599/686): gnome-control-center-filesystem-3.28.2-37.el8.noarch.rpm                                27 kB/s |  13 kB     00:00    
(600/686): mesa-libgbm-22.3.0-2.el8.x86_64.rpm                                                    227 kB/s |  60 kB     00:00    
(601/686): gcc-8.5.0-18.el8.x86_64.rpm                                                            8.7 MB/s |  23 MB     00:02    
(602/686): fence-agents-drac5-4.2.1-112.el8.noarch.rpm                                             71 kB/s |  28 kB     00:00    
(603/686): gdm-40.0-27.el8.x86_64.rpm                                                             3.1 MB/s | 881 kB     00:00    
(604/686): cpp-8.5.0-18.el8.x86_64.rpm                                                            6.5 MB/s |  10 MB     00:01    
(605/686): fence-agents-virsh-4.2.1-112.el8.noarch.rpm                                            196 kB/s |  28 kB     00:00    
(606/686): fence-agents-ilo-mp-4.2.1-112.el8.noarch.rpm                                           380 kB/s |  27 kB     00:00    
(607/686): fence-agents-mpath-4.2.1-112.el8.noarch.rpm                                            161 kB/s |  30 kB     00:00    
(608/686): dbus-x11-1.12.8-24.el8.x86_64.rpm                                                      288 kB/s |  61 kB     00:00    
(609/686): edk2-ovmf-20220126gitbb1bba3d77-4.el8.noarch.rpm                                       8.0 MB/s | 3.6 MB     00:00    
(610/686): xorg-x11-server-common-1.20.11-15.el8.x86_64.rpm                                       178 kB/s |  44 kB     00:00    
(611/686): annobin-10.94-1.el8.x86_64.rpm                                                         3.2 MB/s | 965 kB     00:00    
(612/686): gcc-plugin-annobin-8.5.0-18.el8.x86_64.rpm                                             399 kB/s |  35 kB     00:00    
(613/686): desktop-file-utils-0.26-1.el8.x86_64.rpm                                               294 kB/s |  80 kB     00:00    
(614/686): ostree-libs-2022.2-6.el8.x86_64.rpm                                                    1.8 MB/s | 446 kB     00:00    
(615/686): fence-agents-cisco-mds-4.2.1-112.el8.noarch.rpm                                        147 kB/s |  28 kB     00:00    
(616/686): fence-agents-vmware-rest-4.2.1-112.el8.noarch.rpm                                       65 kB/s |  28 kB     00:00    
(617/686): fence-agents-ilo-moonshot-4.2.1-112.el8.noarch.rpm                                     295 kB/s |  27 kB     00:00    
(618/686): libwpe-1.10.0-4.el8.x86_64.rpm                                                         109 kB/s |  26 kB     00:00    
(619/686): fence-agents-apc-4.2.1-112.el8.noarch.rpm                                              129 kB/s |  29 kB     00:00    
(620/686): fence-agents-eaton-snmp-4.2.1-112.el8.noarch.rpm                                       287 kB/s |  29 kB     00:00    
(621/686): fence-agents-ilo2-4.2.1-112.el8.noarch.rpm                                             140 kB/s |  30 kB     00:00    
(622/686): fence-agents-rhevm-4.2.1-112.el8.noarch.rpm                                            272 kB/s |  29 kB     00:00    
(623/686): gnome-control-center-3.28.2-37.el8.x86_64.rpm                                          6.1 MB/s | 4.8 MB     00:00    
(624/686): fence-agents-ipdu-4.2.1-112.el8.noarch.rpm                                             101 kB/s |  28 kB     00:00    
(625/686): xorg-x11-server-Xorg-1.20.11-15.el8.x86_64.rpm                                         5.2 MB/s | 1.5 MB     00:00    
(626/686): fence-agents-all-4.2.1-112.el8.x86_64.rpm                                               28 kB/s |  25 kB     00:00    
(627/686): mesa-dri-drivers-22.3.0-2.el8.x86_64.rpm                                               8.7 MB/s | 7.3 MB     00:00    
(628/686): fence-virt-1.0.0-6.el8.x86_64.rpm                                                      126 kB/s |  52 kB     00:00    
(629/686): usbredir-0.12.0-4.el8.x86_64.rpm                                                       223 kB/s |  52 kB     00:00    
(630/686): fence-agents-emerson-4.2.1-112.el8.noarch.rpm                                          141 kB/s |  27 kB     00:00    
(631/686): gnome-shell-3.32.2-50.el8.x86_64.rpm                                                   6.2 MB/s | 1.5 MB     00:00    
(632/686): fence-agents-amt-ws-4.2.1-112.el8.noarch.rpm                                            37 kB/s |  29 kB     00:00    
(633/686): fence-agents-kdump-4.2.1-112.el8.x86_64.rpm                                            213 kB/s |  40 kB     00:00    
(634/686): fence-agents-apc-snmp-4.2.1-112.el8.noarch.rpm                                          23 kB/s |  29 kB     00:01    
(635/686): libsndfile-1.0.28-13.el8.x86_64.rpm                                                    807 kB/s | 193 kB     00:00    
(636/686): libgs-9.27-6.el8.x86_64.rpm                                                            8.8 MB/s | 3.1 MB     00:00    
(637/686): fence-agents-rsa-4.2.1-112.el8.noarch.rpm                                               20 kB/s |  27 kB     00:01    
(638/686): fence-agents-vmware-soap-4.2.1-112.el8.noarch.rpm                                      157 kB/s |  29 kB     00:00    
(639/686): fence-agents-hpblade-4.2.1-112.el8.noarch.rpm                                           25 kB/s |  28 kB     00:01    
(640/686): alsa-lib-1.2.8-2.el8.x86_64.rpm                                                        1.7 MB/s | 497 kB     00:00    
(641/686): fence-agents-eps-4.2.1-112.el8.noarch.rpm                                              326 kB/s |  28 kB     00:00    
(642/686): fence-agents-intelmodular-4.2.1-112.el8.noarch.rpm                                     341 kB/s |  28 kB     00:00    
(643/686): fence-agents-compute-4.2.1-112.el8.noarch.rpm                                          186 kB/s |  35 kB     00:00    
(644/686): fence-agents-wti-4.2.1-112.el8.noarch.rpm                                               26 kB/s |  29 kB     00:01    
(645/686): fence-agents-ifmib-4.2.1-112.el8.noarch.rpm                                             28 kB/s |  28 kB     00:00    
(646/686): gnome-session-3.28.1-20.el8_8.x86_64.rpm                                               3.5 MB/s | 381 kB     00:00    
(647/686): gnome-session-wayland-session-3.28.1-20.el8_8.x86_64.rpm                               114 kB/s | 9.5 kB     00:00    
(648/686): fence-agents-ibmblade-4.2.1-112.el8.noarch.rpm                                          18 kB/s |  27 kB     00:01    
(649/686): pacemaker-schemas-2.1.5-8.1.el8_8.noarch.rpm                                           534 kB/s | 101 kB     00:00    
(650/686): gnome-session-xsession-3.28.1-20.el8_8.x86_64.rpm                                       69 kB/s |  14 kB     00:00    
(651/686): corosynclib-3.1.7-1.el8.x86_64.rpm                                                      58 kB/s |  69 kB     00:01    
(652/686): libvirt-daemon-driver-interface-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm    2.2 MB/s | 214 kB     00:00    
(653/686): libvirt-daemon-kvm-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm                 683 kB/s |  69 kB     00:00    
(654/686): libvirt-daemon-driver-nwfilter-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm     2.1 MB/s | 239 kB     00:00    
(655/686): libvirt-libs-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm                       8.6 MB/s | 4.7 MB     00:00    
(656/686): libvirt-daemon-driver-storage-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm      157 kB/s |  70 kB     00:00    
(657/686): mutter-3.32.2-69.el8_8.x86_64.rpm                                                      6.7 MB/s | 2.5 MB     00:00    
(658/686): libvirt-daemon-driver-nodedev-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm      2.1 MB/s | 224 kB     00:00    
(659/686): libvirt-daemon-driver-storage-scsi-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm 868 kB/s |  77 kB     00:00    
(660/686): pacemaker-libs-2.1.5-8.1.el8_8.x86_64.rpm                                              4.3 MB/s | 761 kB     00:00    
(661/686): libvirt-daemon-driver-storage-core-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm 2.2 MB/s | 258 kB     00:00    
(662/686): libvirt-daemon-driver-secret-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm       1.5 MB/s | 202 kB     00:00    
(663/686): libvirt-daemon-driver-storage-disk-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm 854 kB/s |  80 kB     00:00    
(664/686): libtiff-4.0.9-28.el8_8.x86_64.rpm                                                      1.7 MB/s | 189 kB     00:00    
(665/686): libvirt-daemon-config-network-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm      784 kB/s |  72 kB     00:00    
(666/686): libvirt-daemon-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm                     1.7 MB/s | 423 kB     00:00    
(667/686): libvirt-daemon-driver-storage-mpath-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rp 719 kB/s |  75 kB     00:00    
(668/686): libvirt-daemon-driver-qemu-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm         2.8 MB/s | 928 kB     00:00    
(669/686): libvirt-daemon-driver-storage-iscsi-direct-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x8 693 kB/s |  79 kB     00:00    
(670/686): libvirt-daemon-driver-storage-iscsi-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rp 603 kB/s |  77 kB     00:00    
(671/686): pacemaker-cluster-libs-2.1.5-8.1.el8_8.x86_64.rpm                                      1.2 MB/s | 146 kB     00:00    
(672/686): libvirt-daemon-driver-network-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm      1.9 MB/s | 239 kB     00:00    
(673/686): libvirt-daemon-driver-storage-gluster-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64. 733 kB/s |  82 kB     00:00    
(674/686): libvirt-client-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm                     2.1 MB/s | 419 kB     00:00    
(675/686): libvirt-daemon-driver-storage-rbd-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64.rpm  280 kB/s |  85 kB     00:00    
(676/686): libtpms-0.9.1-2.20211126git1ff6fe1f43.module+el8.8.0+18453+1482ba89.x86_64.rpm         639 kB/s | 185 kB     00:00    
(677/686): libvirt-daemon-driver-storage-logical-8.0.0-19.2.module+el8.8.0+18944+7f5acf75.x86_64. 702 kB/s |  81 kB     00:00    
(678/686): gnome-desktop3-3.32.2-1.el8_8.2.x86_64.rpm                                             2.6 MB/s | 577 kB     00:00    
(679/686): bind-libs-9.11.36-8.el8_8.1.x86_64.rpm                                                 818 kB/s | 176 kB     00:00    
(680/686): python3-bind-9.11.36-8.el8_8.1.noarch.rpm                                              373 kB/s | 151 kB     00:00    
(681/686): bind-libs-lite-9.11.36-8.el8_8.1.x86_64.rpm                                            1.9 MB/s | 1.2 MB     00:00    
(682/686): bind-license-9.11.36-8.el8_8.1.noarch.rpm                                              807 kB/s | 104 kB     00:00    
(683/686): bind-utils-9.11.36-8.el8_8.1.x86_64.rpm                                                2.9 MB/s | 453 kB     00:00    
(684/686): webkit2gtk3-jsc-2.38.5-1.el8_8.5.x86_64.rpm                                            3.7 MB/s | 3.7 MB     00:00    
(685/686): webkit2gtk3-2.38.5-1.el8_8.5.x86_64.rpm                                                7.7 MB/s |  21 MB     00:02    
(686/686): firefox-102.13.0-2.el8_8.x86_64.rpm                                                    5.5 MB/s | 109 MB     00:19    
----------------------------------------------------------------------------------------------------------------------------------
Total                                                                                             6.0 MB/s | 601 MB     01:40     
Anvil Community Repository (rhel-8)                                                               1.6 MB/s | 1.6 kB     00:00    
Importing GPG key 0xD548C925:
 Userid     : "Alteeve's Niche! Inc. repository <support@alteeve.ca>"
 Fingerprint: 3082 E979 518A 78DD 9569 CD2E 9D42 AA76 D548 C925
 From       : /etc/pki/rpm-gpg/RPM-GPG-KEY-Alteeve-Official
Is this ok [y/N]: y
Key imported successfully
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
  Running scriptlet: npm-1:6.14.11-1.10.24.0.1.module+el8.3.0+10166+b07ac28e.x86_64                                           1/1 
  Preparing        :                                                                                                          1/1 
  Installing       : gdk-pixbuf2-2.36.12-5.el8.x86_64                                                                       1/686 
  Running scriptlet: gdk-pixbuf2-2.36.12-5.el8.x86_64                                                                       1/686 
  Installing       : atk-2.28.1-1.el8.x86_64                                                                                2/686 
  Installing       : libwayland-client-1.21.0-1.el8.x86_64                                                                  3/686 
<...snip...>
<...snip...>
  Verifying        : bind-utils-32:9.11.36-8.el8_8.1.x86_64                                                               684/686 
  Verifying        : webkit2gtk3-jsc-2.38.5-1.el8_8.5.x86_64                                                              685/686 
  Verifying        : webkit2gtk3-2.38.5-1.el8_8.5.x86_64                                                                  686/686 
Installed products updated.

Installed:
  GConf2-3.2.6-22.el8.x86_64                                                                                                      
  ModemManager-glib-1.20.2-1.el8.x86_64                                                                                           
  NetworkManager-initscripts-updown-1:1.40.16-3.el8_8.noarch                                                                      
<...snip...>
  yum-utils-4.0.21-19.el8_8.noarch                                                                                                
  zenity-3.28.1-2.el8.x86_64                                                                                                      
  zlib-devel-1.2.11-21.el8_7.x86_64                                                                                               

Complete!

Done!

Anvil! Subnode; Installing anvil-node

dnf install anvil-dr
Updating Subscription Management repositories.
Last metadata expiration check: 0:00:47 ago on Fri 28 Jul 2023 06:10:29 PM EDT.
Dependencies resolved.
-=================================================================================================================================
 Package                         Arch   Version                                    Repository                                Size
-=================================================================================================================================
Installing:
 anvil-node                      noarch 2.90-1.2704.25b460.el8                     anvil-community-rhel-8                    25 k
Installing dependencies:
 NetworkManager-initscripts-updown
                                 noarch 1:1.40.16-3.el8_8                          rhel-8-for-x86_64-baseos-rpms            143 k
 akmod-drbd                      x86_64 9.2.4-1.el8                                anvil-community-rhel-8                   1.3 M
 akmods                          noarch 0.5.7-8.el8                                anvil-community-rhel-8                    34 k
 alsa-lib                        x86_64 1.2.8-2.el8                                rhel-8-for-x86_64-appstream-rpms         497 k
 annobin                         x86_64 10.94-1.el8                                rhel-8-for-x86_64-appstream-rpms         965 k
 anvil-core                      noarch 2.90-1.2704.25b460.el8                     anvil-community-rhel-8                   1.0 M
<...snip...> 
 rubygem-io-console              x86_64 0.4.6-110.module+el8.6.0+15956+aa803fc1    rhel-8-for-x86_64-appstream-rpms          68 k
 rubygem-rdoc                    noarch 6.0.1.1-110.module+el8.6.0+15956+aa803fc1  rhel-8-for-x86_64-appstream-rpms         457 k
 telnet                          x86_64 1:0.17-76.el8                              rhel-8-for-x86_64-appstream-rpms          72 k
Enabling module streams:
 idm                                    client                                                                                   
 llvm-toolset                           rhel8                                                                                    
 perl-App-cpanminus                     1.7044                                                                                   
 perl-DBD-Pg                            3.7                                                                                      
 perl-DBI                               1.641                                                                                    
 perl-YAML                              1.24                                                                                     
 postgresql                             10                                                                                       
 python36                               3.6                                                                                      
 ruby                                   2.5                                                                                      

Transaction Summary
-================================================================================================================================
Install  489 Packages

Total download size: 330 M
Installed size: 1.3 G
Is this ok [y/N]:

Disaster Recovery Host; Installing anvil-dr

dnf install anvil-dr
Updating Subscription Management repositories.
Last metadata expiration check: 0:00:46 ago on Fri 28 Jul 2023 06:10:37 PM EDT.
Dependencies resolved.
-=================================================================================================================================
 Package                         Arch   Version                                    Repository                                Size
-=================================================================================================================================
Installing:
 anvil-dr                        noarch 2.90-1.2704.25b460.el8                     anvil-community-rhel-8                   8.5 k
Installing dependencies:
 NetworkManager-initscripts-updown
                                 noarch 1:1.40.16-3.el8_8                          rhel-8-for-x86_64-baseos-rpms            143 k
 SDL                             x86_64 1.2.15-39.el8                              rhel-8-for-x86_64-appstream-rpms         218 k
 akmod-drbd                      x86_64 9.2.4-1.el8                                anvil-community-rhel-8                   1.3 M
 akmods                          noarch 0.5.7-8.el8                                anvil-community-rhel-8                    34 k
<...snip...> 
 geolite2-country                noarch 20180605-1.el8                             rhel-8-for-x86_64-appstream-rpms         1.0 M
 openssl-devel                   x86_64 1:1.1.1k-9.el8_7                           rhel-8-for-x86_64-baseos-rpms            2.3 M
 telnet                          x86_64 1:0.17-76.el8                              rhel-8-for-x86_64-appstream-rpms          72 k
Enabling module streams:
 idm                                    client                                                                                   
 llvm-toolset                           rhel8                                                                                    
 perl-App-cpanminus                     1.7044                                                                                   
 perl-DBD-Pg                            3.7                                                                                      
 perl-DBI                               1.641                                                                                    
 perl-YAML                              1.24                                                                                     
 postgresql                             10                                                                                       
 python36                               3.6                                                                                      

Transaction Summary
-=================================================================================================================================
Install  459 Packages

Total download size: 315 M
Installed size: 1.3 G
Is this ok [y/N]:


Enabling the Alteeve Repo

On all machines, post OS install, add the Anvil! repo;

dnf -y install https://www.alteeve.com/an-repo/m3/anvil-release-latest.noarch.rpm

Once installed, you need to enable the repository.

Repository Options
Community This is free, and it gets the latest updates generated by our CI/CD testing infrastructure.
Commercial This is paid and includes a support contract. Updates are curated for maximum reliability.

If you purchase a commercial support agreement, you will be provided a key to access the commercial repository.

To enable the Anvil! repository, run either:

Repository Options
Community
alteeve-repo-setup
Commercial
alteeve-repo-setup -k <key>

Now update the OS;

dnf update

If the kernel was updated, it is recommended (but not required) to reboot now.

In all cases, the Anvil! will rename network interfaces. For this to work, the biosdevname package needs to be removed.

dnf remove biosdevname

Now, we can install the anvil RPM. This next step is what defines a given machine as a Striker, Node or DR Host. As such, be careful to install the right one for the machine you're configuring.

Install the Anvil! RPM
Striker Dashboard
dnf install anvil-striker
Node
dnf install anvil-node
DR Host
dnf install anvil-dr



 

Any questions, feedback, advice, complaints or meanderings are welcome.
Us: Alteeve's Niche! Support: Mailing List IRC: #clusterlabs on Libera Chat
© Alteeve's Niche! Inc. 1997-2023   Anvil! "Intelligent Availability™" Platform
legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions.